Hydraulic wedge splitters are tools for the controlled splitting of concrete and rock. They generate high, directed forces in the borehole by means of a hydraulically actuated splitting wedge and initiate a crack in the workpiece. The method operates with low vibration levels and is comparatively quiet, which is why it has proven itself in sensitive environments, in tunnel construction, and in selective deconstruction. In the context of Darda GmbH, hydraulic wedge splitters are directly associated with rock and concrete splitter systems, the stone-splitting cylinders used for this purpose, and hydraulic power packs. In combination with concrete demolition shears, combi shears, steel shears, or Multi Cutters, reinforcing steel can be separated after the splitting process and concrete sections can be removed safely.
Definition: What is meant by hydraulic wedge splitters
A hydraulic wedge splitter is a hydraulically driven splitting tool that is inserted into predrilled boreholes. A cylinder drives a wedge or a wedge set apart between reaction shoes, creating a split in the material. The crack generally runs along the weakest zone and follows the orientation of the wedge. Hydraulic wedge splitters belong to the non-explosive demolition and extraction methods. In the Darda GmbH portfolio, they are realized as stone and concrete splitting devices supplied with pressure by hydraulic power packs. Stone-splitting cylinders are the central work-performing element.
Operating principle and design
Hydraulic wedge splitters consist of a splitting cylinder, a wedge set with reaction shoes, a hose bundle, and the energy supply via a hydraulic power pack. The cylinder converts the oil pressure delivered by the pump into axial motion. The wedge translates this motion into radial spreading forces. The contact surfaces of the reaction shoe transfer the load to the borehole and generate a directed tensile stress state that initiates the crack.
Hydraulic power packs and energy transmission
The hydraulic power pack provides the required flow rate and pressure (see hydraulic power units for splitters). Via quick couplings and pressure hoses, the energy is transmitted to the splitting cylinder with minimal loss. In practice, compact power packs are advantageous when access is limited, for example during building gutting or at the tunnel face. For longer splitting cycles and larger cylinders, power packs with higher flow are appropriate to keep cycle times short.
Splitting cylinders, wedge and reaction shoes
Splitting cylinders differ in splitting force, stroke, wedge geometry, and borehole dimensions. Wedge geometry influences force transmission and required stroke; longer wedges achieve deeper splitting action but require sufficient borehole depth. The reaction shoe guides and supports the wedge and defines the splitting direction. High-quality surfaces on the contact zones reduce friction and increase the repeatability of the splitting result.
Fields of application for hydraulic wedge splitters
Hydraulic wedge splitters are used where low vibration levels, noise control, or precise separation lines are required. In concrete demolition and special demolition, foundation heads, walls, slab supports, or bridge caps can be opened in a controlled manner. In building gutting and concrete cutting, splitting lines are set so that components can subsequently be gripped and removed with concrete demolition shears or combi shears. In rock excavation and tunnel construction, splitting enables low-vibration advance, especially in zones with blasting restrictions. In natural stone extraction, splitting is carried out along joints or defined drilling patterns to free raw blocks. Special applications include opening massive machine foundations, separating overlay concrete, or working in areas with elevated requirements for emissions and vibrations.
Borehole planning and splitting strategy
The quality of the splitting result depends significantly on the drilling pattern. Borehole diameter, depth, spacing, and edge distances are chosen based on the material, component geometry, and the desired separation line. In reinforced concrete, the position of the bars must be considered so the crack can develop between the bars. In rock, natural fractures support crack propagation; in isotropic rock, a regular grid is advantageous. A clean borehole with minimal widening improves load transfer from the reaction shoes and reduces the risk of jamming. The orientation of the wedge determines the preferred crack direction: for straight separations, the wedge should be aligned parallel to the desired splitting line, while for block removal, rotating the wedge between cycles can be beneficial.
Advantages and limitations compared to alternative methods
Strengths include low-vibration operation, lower noise emissions compared to chiseling or breaker hammer methods, precise splitting lines, and good control over crack propagation. Hydraulic wedge splitters are suitable for environments with sensitive infrastructure, in inhabited areas, or where heritage protection requirements apply. Limitations arise from the necessary drilling effort and the fact that reinforcing steel is not split. Steel elements are separated after splitting with concrete demolition shears, steel shears, or Multi Cutters. With very thin components or heavily fiber-reinforced materials, crack propagation can be uneven; alternative methods such as sawing or shear processing are often more suitable in such cases.
Material behavior and influencing factors
Concrete strength, aggregate structure, moisture, and temperature influence crack propagation. Higher strengths require tighter drilling patterns and sometimes greater splitting forces. In reinforced concrete, reinforcement guides the crack; an offset drilling grid supports crack passage between bars. In natural rock, fractures, bedding, and anisotropy govern directionality. In highly abrasive rocks, careful maintenance of the wedge set maintains consistent performance.
Concrete with reinforcement
Reinforcing steel is not split. After fracturing the concrete aggregate, reinforcement bridges remain that must be separated mechanically. A split–grip–cut sequence is suitable here: the hydraulic wedge splitter sets the crack line, concrete demolition shears loosen and grip the component, and steel shears or Multi Cutters cut the bars. This sequence improves control over fall direction and minimizes secondary damage.
Rock and natural stone
In natural stone extraction, work proceeds along existing planes of weakness to optimize block geometry. In tunnel construction, the splitter supports excavation in zones where blasting is prohibited or for profile correction. In highly jointed rock, an adapted drilling pattern with reduced spacing shortens cycle time because cracks converge more quickly.
Workflow in practice
The typical sequence includes defining the separation line, creating the drilling pattern, deburring and cleaning the boreholes, inserting the splitting cylinder, performing the splitting process in coordinated cycles, and finishing. A stepwise sequence with moderate pressure increases improves crack control. After splitting, components are moved with concrete demolition shears or cut to size with combi shears. In confined areas, the order of splitting points should account for stress redistribution to prevent uncontrolled spalling at edges.
Safety, health, and environment
Safe operation with hydraulic wedge splitters requires proper instruction, intact hydraulic components, and suitable personal protective equipment. Pressure lines must be visually inspected before each use; couplings must be clean and latched. A safety distance in the splitting direction applies during operation. Drilling generates dust and noise; dust extraction or wet drilling reduces emissions. Hydraulic fluid must be handled as intended; leaks must be remedied immediately. Regulatory requirements and local provisions, for example concerning vibrations, noise, or work in ATEX zones, must always be checked on a project-specific basis. These notes are general in nature and not legally binding.
Maintenance, care, and typical malfunctions
Regular cleaning of the wedge set, inspection of the reaction surfaces, and timely replacement of worn wedge tips ensure consistent splitting performance. Hydraulic hoses must be checked for abrasion and tightness; couplings are kept clean to prevent particle ingress. Typical malfunctions include an incomplete wedge stroke (often due to contamination in the borehole or insufficient borehole depth), jamming of the wedge set (often the result of borehole wall widening), or a failure to initiate cracking (possibly due to excessive borehole spacing or unfavorable alignment relative to reinforcement). Remedies include an adapted drilling grid, correct cleaning of the boreholes, and checking the hydraulic supply from the power pack.
Combination with additional tools
Hydraulic wedge splitters achieve their full potential in coordinated process chains. After splitting, concrete demolition shears facilitate safe gripping and removal of segments. Steel shears cut exposed reinforcement, while Multi Cutters can be used flexibly for mixed materials. Tank cutters are used for special materials when additional separation tasks arise after splitting. The result is controlled, selective deconstruction with clear process steps.
Selection criteria and project planning
Key factors include material type and thickness, desired separation line, accessibility, drilling technology, and cycle time targets. The choice of splitting cylinder and wedge geometry depends on the mine or construction site situation, component thickness, and borehole diameter. The sizing of the hydraulic power pack influences stroke speed and number of cycles. Tight access favors compact cylinders and lightweight power packs; large components require longer wedges and correspondingly matched power packs. A realistic time calculation accounts for drilling share, splitting cycles, and rework with concrete demolition shears or combi shears. Field tests can be used early to optimize drilling grid, wedge orientation, and pacing.
Terminology and differentiation
In practice, hydraulic wedge splitters, stone and concrete splitting devices, and stone-splitting cylinders are often used synonymously, but they refer to different aspects: the splitter as the overall system, the device as the application-ready unit, and the cylinder as the core component. In the Darda GmbH context, the term encompasses the combination of splitting cylinder, wedge set, and hydraulic power pack, which can be configured for concrete demolition and special demolition, building gutting and concrete cutting, rock excavation and tunnel construction, natural stone extraction, as well as special applications.