Glass recycling is a central pillar of the circular economy in construction. Especially during selective deconstruction of buildings, large quantities of flat glass from windows, façades, doors, and interior glazing are generated. The single-grade collection and low-contaminant processing determine whether waste glass becomes high-quality new glass again or diverts into lower-grade applications. In practice, success largely depends on the planned separation of the glass from frames, fastening points, and masonry—a field in which precise, low-vibration methods and tools such as concrete demolition shear and hydraulic wedge splitter play a key role in deconstruction.
Definition: What is meant by glass recycling
Glass recycling is the recovery and reuse of glass waste as a secondary raw material. Waste glass is collected, freed from contaminants, processed into cullet, and fed into the melt for new glass. In the construction context, this mainly concerns flat glass (windows, façades, partition walls) and, to a lesser extent, hollow glass (luminaire covers, glass inserts). A distinction is made between the closed loop (return to flat glass production) and the open loop (e.g., foam glass, expanded glass, aggregates in construction products). Recycling is to be distinguished from reuse, i.e., the renewed use of intact components. Prerequisites for high-quality glass recycling include single-grade collection, removal of coatings and organic interlayers, and minimization of mineral and metallic impurities.
Economic and environmental significance in deconstruction
Glass recycling saves primary raw materials, reduces energy demand in the melt, and lowers greenhouse gas emissions. For deconstruction projects, clean separation has a double effect: disposal costs decrease while revenue potential arises from high-quality cullet fractions. Tenders increasingly require evidence of separate collection, recycling rates, and low-emission deconstruction methods. In urban settings, low-noise, low-vibration separation of glass components from adjacent concrete or masonry is particularly important—here, methods using hydraulic wedge splitter and precise demolition technology with concrete demolition shear support collection quality and the protection of adjacent components.
Glass types in construction and their recyclability
Not every construction glass behaves the same in recycling. The glazing type, coatings, and laminates influence processing.
Tempered safety glass (ESG)
ESG is thermally toughened and shatters into blunt-edged crumbs. It is generally well recyclable, provided coatings and adhesions are minimal. Due to prestressing, controlled breakage in protected areas with planned capture is important.
Laminated safety glass (VSG) with PVB interlayer
VSG consists of two or more glass panes and an organic interlayer (often PVB). The film must be removed before melting or treated separately. Mechanical delamination, thermal separation, or solvent baths may be used depending on the processor. Dismantling in the largest possible panels without excessive size reduction facilitates foil removal.
Insulating glass (multi-pane insulating glass)
Insulating glass contains spacers (aluminum, steel, or plastic) with desiccant and sealants. For high-quality recovery, separation of the panes and removal of spacers are essential. Connections to the reveal and the frame should be released with minimal glass splintering.
Coated and printed glasses
Functional coatings (e.g., low-E) or ceramic prints influence the melt. Depending on the processing route, separate collection can be advisable. Such areas should be planned as their own fraction already during the condition survey.
Wired and fire-protection glass
Wired glass contains embedded metal mesh; fire-protection glasses can be multilayer systems with gel or film fillings. Coordinated separation and fractionation are necessary here. Separation of metal mesh and glass takes place during processing but is significantly facilitated by deconstruction-friendly dismantling.
Selective deconstruction: From condition survey to single-grade collection
The basis for high-quality glass recycling is a structured process that minimizes risks and secures material quality.
Pre-survey and documentation
- Record all glass areas by type (ESG, VSG, insulating glass), location, and fastening type.
- Check for potential hazardous substances in adjacent materials (e.g., PCBs in joint sealants, asbestos-containing plasters in the connection area, PAHs in sealants). If there are suspicions: schedule expert investigation.
- Define fractions and container logistics (separate containers for VSG, ESG/flat glass, coated glasses, mixed fractions).
Dismantling planning and protective measures
- Shielding against splinter flight, controlled work areas, PPE with cut protection and eye protection.
- Reduction of vibrations and secondary damage through targeted separation of fastening points and adjacent concrete/masonry.
- Sequence: first release, then carry—mechanical destruction only where safety requires it.
Execution in buildings and façades
- Expose anchor points, retaining strips, and reveals, e.g., by targeted nibbling of edge concrete with concrete demolition shear or by controlled splitting with hydraulic wedge splitter.
- Separate frame profiles and hardware (combination shears, steel shears, multi cutters depending on material thickness).
- Gently release glass panes; for VSG, keep them as large as possible to facilitate later interlayer removal.
- Immediate fractionation into prepared, padded collection containers to avoid glass-ceramic-porcelain contamination.
Tools and methods in interaction with devices from Darda GmbH
The choice of method influences material purity, safety, and efficiency. In selective deconstruction, precise, hydraulic tools have proven effective.
Concrete demolition shear: Precise removal at reveals and lintels
Concrete demolition shear enables controlled removal of concrete in the area of window and door openings. This exposes embedded parts without unnecessarily damaging the glazing. The advantage: low vibrations, targeted load transfer, and good visibility of anchor points, which supports the safe removal of glass panes.
Hydraulic wedge splitter: Low-vibration and quiet
Hydraulic wedge splitter works with hydraulic splitting force. Comparable hydraulic rock and concrete splitters can be used where controlled separation is required. It is suitable for clean separation of concrete parapets or copings near façades when vibrations and noise must be reduced. This protects glass remnants, prevents cracking in adjacent panes, and helps release fastenings in a targeted manner.
Combination shears and Multi Cutters: Separate frames and fittings
For aluminum, steel, or heavily profiled frames, combination shears and Multi Cutters score with high cutting force and compactness. They sever profiles, angles, and fittings without unnecessarily stressing the glass panes. This improves separation quality and accelerates fractionation into metal and glass fractions.
Steel shear and cutting torch for thick-walled profiles
Steel shear is suitable for massive steel frames, bracings, and supports in stick-system façades. A cutting torch can assist where thick-walled hollow profiles or closed cross-sections must be opened to safely remove glass or insulation inserts.
Hydraulic power pack: Energy supply indoors and outdoors
Hydraulic power pack is the compact energy source for hydraulic tools. In interior areas, low-emission, quiet solutions are particularly valuable. A matched setup of compact hydraulic power units prevents performance losses and reduces heat build-up in continuous operation.
Rock wedge splitter in special cases
Rock wedge splitter can be used on natural stone façades, plinth areas, or massive embedded parts to gain access to fastenings. The pinpoint splitting effect avoids unnecessary percussive action and protects sensitive glass surfaces nearby.
Quality assurance: Minimize contaminants, increase single-grade purity
The quality of the cullet determines the recovery pathways. The goal is the cleanest possible glass fraction with few contaminants.
Typical contaminants
- Organic materials: sealants (silicone), PVB films, adhesives, paints.
- Metals: spacers, fittings, wire mesh.
- Mineral foreign matter: concrete residues, mortar, ceramics, stones, porcelain.
- Coatings and films: solar control, privacy films, printed layers.
Practical measures
- Remove in large formats instead of indiscriminate size reduction, especially for VSG and insulating glass.
- Pre-separate spacers, frame remnants, and sealants directly during deconstruction.
- Clean, dry storage in suitable containers; do not mix with mineral waste.
- Document the fractions for proof of compliance and the acceptance criteria of processors.
Safety, health, and environmental protection
Worker protection and environmental protection are integral parts of professional deconstruction.
Work and surroundings safety
- Splinter and edge hazards: appropriate PPE, controlled break lines, shielding.
- Reduced vibrations through splitting techniques and shear methods to avoid secondary damage.
- Load handling: secured lifting and carrying equipment for large formats.
Hazardous substances and legal framework
In connection areas of glazing, materials containing hazardous substances can occur. The assessment and handling of such substances are carried out in accordance with the applicable legal requirements and should be planned and supervised by qualified parties. The information in this text is general in nature and does not replace case-by-case assessment.
Processing and recovery chains
After collection comes technical processing to ensure melt quality and process reliability.
Processing stages
- Pre-separation: removal of visible metals, frame remnants, and films.
- Size reduction and screening: generation of defined cullet sizes.
- Metal separation: magnets and eddy current separators for ferrous and non-ferrous metals.
- Optical sorting: removal of ceramics, stones, porcelain and colored contaminants.
- Fine cleaning: separation of organic residues, dust management.
Recovery pathways
- Return to flat glass production, provided quality requirements are met.
- Production of foam glass and other construction products.
- Material substitution in defined applications when a closed loop is not economically or technically feasible.
The cleaner the separation during deconstruction, the higher the likelihood of high-grade recovery. Precise separation methods—such as targeted opening of concrete connections with concrete demolition shear or low-vibration release using hydraulic wedge splitter—directly improve cullet quality.
Planning and tendering: Formulating sensible requirements
- Specify separate collection: fraction definitions for ESG, VSG, insulating glass, coated glasses.
- Method requirements: preferably low-vibration, precise separation methods for reveals, lintels, and frame connections.
- Quality goals: limits for organic and mineral foreign matter in coordination with processors.
- Logistics: suitable, padded containers, weather protection, short transport routes.
- Documentation: weighing and consignment documents, photo documentation, sampling as needed.
Typical pitfalls and how to avoid them
- Unplanned smashing of glass surfaces into mixed construction debris containers: leads to high contamination and reduces recovery quality.
- Lack of exposure of fastening points: increases breakage risk, hinders fractionation.
- Mixing VSG with ESG/insulating glass without labeling: complicates processing.
- Excessive use of percussive methods near façades: promotes secondary damage and splinter flight; precise shear and splitting methods are preferable.
- Underestimated sealants and adhesives: remain as organic contaminants if not removed early.
Relation to application areas of Darda GmbH
Glass recycling is encountered in almost all deconstruction projects. In gutting works and cutting, the focus is on releasing glass panes, separating frames, and exposing anchor points—this is where concrete demolition shear, combination shears, and Multi Cutters prove their worth. In concrete demolition and special demolition, hydraulic wedge splitter is valuable for separating adjacent concrete areas with low vibration, thus keeping the glass fractions clean. In special deployment scenarios, such as complex façades or confined inner-city environments, compact hydraulic solutions with suitable hydraulic power pack are in demand to work quietly and in a controlled manner. When dismantling massive steel frames, steel shear and, for thick-walled hollow profiles, a cutting torch can also facilitate targeted opening. The common denominator is always the same: precise separation, protection of the surroundings, and the highest cullet quality for glass recycling.
Practical guide: Streamlined workflows for high cullet quality
- Create a glass register and define fractions.
- Define the deconstruction sequence with a focus on exposure and safe removal.
- Select tools: concrete demolition shear for reveals/lintels, hydraulic wedge splitter for low-vibration separation points, shears for frames.
- Provide containers and transport chains; clarify responsibilities.
- Ensure quality control and documentation during ongoing operations.
Circular economy and climate impact
The higher the share of waste glass in new production, the lower the primary raw material and energy demand. Construction projects that already consider glass as a deconstruction- and recycling-friendly resource in the planning phase benefit in execution and balance. The interplay of careful collection, precise separation technology, and clean logistics shifts glass flows from mixed construction debris to high-quality uses—a measurable contribution to resource conservation.