Asbestos

Asbestos is a building material historically used widely thanks to its special technical properties—and at the same time a hazardous substance with severe health risks. In deconstruction, during building gutting, and in concrete demolition, the proper handling of materials containing asbestos is central. For planning concrete demolition and special deconstruction, it is important to know where asbestos may occur, how to avoid fiber release, and how, after a secured asbestos remediation, the mechanical deconstruction can safely and precisely continue with tools such as concrete pulverizers or stone and concrete splitters.

Definition: What is meant by asbestos

Asbestos refers to a group of naturally occurring, fibrous silicate minerals. They are resistant to heat and chemicals, have high tensile strength, and are non-combustible. These advantages led to decades of use in construction products such as asbestos cement (fiber cement), fire protection panels, seals, and floor coverings. The critical issue is the release of respirable fibers: if these penetrate deep into the lungs, they can promote severe diseases. Therefore, asbestos today is subject to strict bans and protection regulations. However, it is still encountered in existing buildings—during maintenance, building gutting, or deconstruction—and requires a consistently low-contaminant approach.

Historical use and typical locations in existing structures

Asbestos was used in many construction and industrial products until the late 1980s and 1990s. Typical locations in buildings and infrastructure can include:

• Asbestos cement products (roof and façade panels, corrugated sheets, pipes, ventilation ducts, planter boxes)
• Fire protection and lightweight panels, ceiling tiles, cable ducts
• Floor coverings (PVC tiles), bituminous adhesives, fillers, plasters, and tile adhesives
• Seals, cords, felts, collars, door seals, equipment insulation
• Sprayed asbestos in older technical installations, beams, and ceilings

In the context of mineral components, it is important to note: asbestos can be present in coatings, adhesive layers, or embedded parts on concrete and masonry surfaces. Before concrete demolition, such layers must be identified, assessed, and, if necessary, removed or encapsulated by specialist contractors before mechanical equipment such as concrete pulverizers or stone and concrete splitters is used.

Health hazards and precautions

Asbestos fibers are respirable. Risks arise especially when material is broken, sawn, ground, or otherwise worked in a dusty manner. In practice this means: activities on potentially asbestos-containing components must be clarified in advance, releases must be avoided, and only qualified specialists may carry out such work. Personal protective equipment, suitable extraction and wetting procedures, and a regulated workflow are established measures. Legally, depending on the country, binding requirements, approval obligations, and technical rules must be observed; the specific interpretation is always project- and authority-specific.

Asbestos in the context of concrete demolition and special demolition

In concrete demolition and special demolition, a fundamental principle applies: hazardous substances first—structural stability and structure afterwards. Materials containing asbestos are removed or separated by specialist contractors before intervening in load-bearing concrete. Only then does the actual deconstruction of mineral components begin. Here, precise and low-vibration tools can help support low-dust working methods and protect adjacent areas:

• Concrete pulverizers grip and crush components in a controlled manner, often with less secondary breakage than cutting methods. This reduces potential dust generation compared to dry separation cuts.
• Stone and concrete splitters as well as hydraulic wedge splitters separate components via controlled splitting forces. This enables structured deconstruction with limited vibration.
• Hydraulic power packs provide the power supply for compact tools and allow use in confined conditions—such as during building gutting and cutting in existing structures.
• Combination shears and Multi Cutters can be used to selectively detach non-mineral attachments after asbestos-containing layers have been professionally removed.
• Steel shears and tank cutters are used for the separating deconstruction of metallic components, provided that potential asbestos coatings or seals have been evaluated and addressed beforehand.

Low-dust and low-fiber working methods

Where asbestos is demonstrably not present or remediation has been completed, fracture- and split-based methods support low-dust and low-fiber processing of mineral components. Crucial factors are good accessibility, a considered demolition sequence, and an adapted tool selection. Wetting, local extraction, and a thoughtful cut or split pattern can additionally help keep emissions low.

Planning, investigation, and documentation

Careful planning is the key. Before deconstruction work, construction records are reviewed, construction years and alterations are assessed, and suspicious materials are identified. If needed, sampling is carried out by qualified specialists followed by laboratory analysis. The results are incorporated into the deconstruction and safety concept. Relevant steps, protective measures, and disposal routes are documented. This makes it possible to set the sequence of work—first asbestos remediation, then mechanical deconstruction—in a binding and transparent manner.

Material identification: practical guidance

Asbestos cannot be reliably ruled out by visual inspection alone. Nevertheless, typical construction years, products, and surfaces provide clues. Asbestos cement often appears as thin-walled, hard, cement-gray components with a characteristic fiber structure. Adhesives, fillers, or plasters can also contain asbestos but are hardly distinguishable visually. Samples may only be taken by trained personnel under suitable protective measures. Until clarified, suspect materials should be treated as potentially asbestos-containing as a precaution.

Asbestos cement versus mineral concrete: differences in deconstruction

Asbestos cement (fiber cement panels, pipes) is generally dismantled and packaged as low-breakage and intact as possible to avoid fiber release. This is a task for specialized personnel. Only after components or layers containing asbestos have been removed does the deconstruction of the remaining mineral stock begin. Depending on the structural system, space constraints, and target geometry, concrete pulverizers or stone and concrete splitters are then used in a targeted manner, supplemented by hydraulic power packs for power supply.

Areas of application: from buildings to infrastructure

Asbestos-relevant issues can arise across multiple areas of application. The selection and sequence of tools are guided by the situation on site:

• Concrete demolition and special demolition: After remediation, the combination of concrete pulverizers and stone and concrete splitters enables a structured, low-vibration deconstruction.
• Building gutting and cutting: Selective detachment of fit-out elements with combination shears and Multi Cutters, provided asbestos-containing layers have been professionally removed beforehand.
• Rock excavation and tunnel construction: In geological formations with potential natural asbestos occurrence, a conservative, low-dust approach is required. Splitting techniques can offer advantages here when embedded in a suitable protection concept.
• Natural stone extraction: If asbestos-bearing rocks are suspected, geological expertise, monitoring, and appropriate working methods are essential before splitting or cutting tools are used.
• Special applications: Confined spaces, sensitive environments, or assets with unknown material histories require particularly careful investigation, flexible hydraulic solutions, and a coordinated approach.

Concrete pulverizers in contamination-sensitive deconstruction

Concrete pulverizers enable targeted gripping, breaking, and detachment of components. They support controlled load transfer and, in combination with wetting and extraction, can help keep emissions low. For attachments or inserts made of steel, the bond can be selectively released so that steel shears or combination shears can complete the exposure.

Stone and concrete splitters in demanding environments

Stone and concrete splitters as well as hydraulic wedge splitters generate controlled splitting forces within the component. In areas where vibrations, noise, or sparks are undesirable, they offer a quiet and precise alternative. In rock excavation and tunnel construction, splitting methods can be part of an overall concept when geological investigations and protective measures provide for this.

Hydraulic system technology: power supply and controllability

Hydraulic power packs supply compact deconstruction tools with energy. Their precise controllability is particularly advantageous in special applications and during building gutting and cutting, for example in areas with restricted access or high protection requirements. Sensitive dosing of splitting or clamping force supports gentle progress and helps protect adjacent zones that have already been cleaned.

Disposal and environmental aspects

Asbestos-containing waste must be packaged separately, labeled, and disposed of via designated routes. Material removed with minimal breakage facilitates safe packaging. Separating asbestos-containing and non-asbestos waste is sensible for health protection and cost certainty. For mineral residual materials from the subsequent concrete deconstruction, the usual requirements for recycling or disposal apply—depending on purity, origin, and local permissibility.

Project sequence: from suspicion to mechanical deconstruction

1. Initial assessment and investigation of the existing structure, review of documentation and construction periods
2. Sampling and analysis by qualified entities if there are indications of suspicion
3. Remediation planning with definition of protection and work areas
4. Asbestos remediation by competent specialist contractors
5. Mechanical deconstruction of the remaining mineral stock with suitable tools (e.g., concrete pulverizers, stone and concrete splitters)
6. Orderly disposal, cleaning, and documentation

Tool selection: criteria for low-contamination deconstruction

After remediation, component geometry, reinforcement content, accessibility, and structural framework conditions determine the tool choice. Relevant criteria are:

• Precision and controllability: Sensitive control of crushing or splitting force minimizes collateral breakage.
• Low vibration and noise: Protects personnel and surroundings, facilitates work in sensitive areas.
• Compact design: Advantageous during building gutting and in buildings with limited transport routes.
• Compatibility: Combination with hydraulic power packs and complementary tools such as combination shears, Multi Cutters, steel shears, or tank cutters.

Terminology and classification in the construction context

In the language of construction and deconstruction, a distinction is made between asbestos-containing materials, asbestos-suspect areas, and zones released as asbestos-free. This classification governs the sequence of work: first the securing or removal of asbestos-containing substances, then the structural deconstruction. Terms such as low-contamination, low-fiber, or low-breakage describe established objectives for working methods that minimize emissions. Practical implementation follows the respective remediation plan and the applicable rules of the art.

Practical application examples

In the concrete demolition and special demolition of an existing building, asbestos-containing floor adhesives and asbestos cement façade panels can first be removed. This is followed by the deconstruction of load-bearing components: concrete pulverizers remove slab edges and openings in a controlled manner, while stone and concrete splitters divide massive components into manageable segments. During building gutting and cutting, combination shears and Multi Cutters help selectively detach remaining installations. Metal profiles are separated with steel shears; tank cutters may be considered for metallic vessels based on a suitable risk assessment—provided any asbestos-containing seals have already been professionally addressed.

Safety-oriented organization

Coordination between asbestos remediation and deconstruction saves time and reduces risks. Clear interfaces, released work areas, controlled material flows, and coordinated tool logistics are decisive. Good communication between planning, remediation, deconstruction, and disposal supports a swift, safe project flow—from investigation to the final page of documentation.