The grid dimension describes a recurring system of measurements and subdivision that organizes components, workflows, and equipment into a plannable lattice. In demolition, deconstruction, rock removal, and natural stone extraction, it governs the positioning of drill holes, cuts, bites, and segments. This defines where drilling is performed, where concrete crushers engage, or where hydraulic rock and concrete splitters act. A well-coordinated grid dimension leads to controlled fracture patterns, predictable forces, and safe, clean execution—regardless of whether hydraulic power units, concrete crushers, rock splitting cylinders, combination shears, Multi Cutters, steel shears, or tank cutters are used.
Definition: What is meant by grid dimension
Grid dimension refers to the regular subdivision of a component, a material, or a work area into uniform fields or axis spacings. This can be a drill-hole grid for splitting work, a cutting grid for segmented separation, a bite grid for concrete crushers, or an axis and joint grid in building design. It serves the repeatability and transferability of lead dimensions so that forces, material resistances, and equipment deployments behave predictably. Typical units are millimeters and centimeters; in addition to the nominal dimension, permissible tolerances and edge distances are decisive, for example to edges, reinforcement, embedded parts, or already weakened areas.
Grid dimension in drilling and splitting methods
In drilling and splitting methods, the grid dimension specifies the spacing at which drill holes are placed so that rock and concrete splitters or rock splitting cylinders generate crack initiations that grow in a controlled way into a separation joint. The hole grid determines fracture path, force demand, equipment use, and cycle time. In concrete demolition, specialized deconstruction, rock demolition, tunnel advance, and natural stone extraction, it forms the basis for a reproducible, low-vibration approach.
Influencing factors on the drill-hole grid
- Material: compressive strength, toughness, texture (e.g., concrete compressive strength class, rock jointing, grain structure).
- Component geometry: thickness, edges, openings, supports and anchorage zones, required edge distances.
- Reinforcement and inserts: bar diameters, mesh grid, conduits, embedded items.
- Tool data: drill diameter, usable spreading width/wedge travel of the splitters, required drilling depth.
- Target outcome: coarse or fine subdivision, desired segment sizes, fracture quality (smooth crack vs. rough break).
Procedure for defining the drill-hole grid dimension
- Analyze material and component (strength, reinforcement position, edge and boundary conditions).
- Select drill diameter and depth to suit the splitter and the component thickness.
- Set up a trial grid (small test fields), assess crack propagation and force demand.
- Adjust the grid dimension iteratively until continuous, planned crack lines form.
- Divide the grid into standard and special areas (e.g., tighter spacing at edges, openings, anchor points).
- Define working and safety clearances, load transfer, and the sequence of splitting operations.
A targeted drill-hole grid reduces energy input, avoids uncontrolled spalling, and enables segment-by-segment separation with clean fracture edges. In combination with suitable hydraulic power units, pressure and flow remain constant, allowing the defined grid to be worked through reliably.
Grid dimension and concrete crushers
For concrete crushers, the grid dimension describes the systematic arrangement of bites and the segmentation of components into manageable fields. This is especially relevant during strip-out, for selective removal of slabs, slab edges, or walls, as well as when opening foundation heads. The crucial factors are the coordination of bite width, component thickness, reinforcement ratio, and permissible residual load-bearing capacities.
Grid for controlled biting
- Start in fields away from edges to minimize restraint and prevent edge breaks.
- Staggered bite sequence to prevent micro-cracks from overlapping beyond critical levels.
- Shortened spacing in areas of high reinforcement density or at embedded items.
- Defined residual web widths as transition zones for subsequent cuts or splitting operations.
- Combination with the drill-hole grid when the concrete crusher and splitter work alternately.
A well-planned bite grid facilitates rebar exposure, reduces rework with steel shears or Multi Cutters, and improves edge quality for subsequent cuts or installing new connections.
Grid dimension in rock demolition and tunneling
In rock demolition and tunneling, the grid dimension controls the placement of rows of drill holes for controlled splitting. Joints, bedding planes, schistosity, and water flow influence the subdivision. A carefully chosen grid exploits natural weakness planes, lowers the force demand of rock splitting cylinders, and reduces vibrations compared to percussive methods. In advances and niches, the grid is used to guide the contour, avoiding overbreak and underbreak and achieving a defined excavation surface.
Grid dimension in strip-out and cutting
When cutting concrete and steel components, the grid dimension defines safe segmentation so that reserve capacity is preserved and load paths are not interrupted prematurely. For combination shears, Multi Cutters, steel shears, and tank cutters, this means cuts, notches, and separations are laid out in a sequence that limits deformation, stabilizes the component, and accounts for gripping and support points.
Cut and notch grids in practice
- Select segment sizes so that handling, rigging, and removal are safely feasible.
- Place notches and relief cuts at closer spacing at stress concentrations and nodes.
- Coordinate with the bite and drill-hole grids when multiple methods are combined.
- Maintain a constant cutting cadence to control heat input and tool wear.
Relation to Darda GmbH products in the context of grid dimension
The grid dimension is defined differently depending on the working tool. The following Darda GmbH categories are typically used within such grid systems:
- Rock and concrete splitters: The drill-hole grid determines crack pattern, segment size, and force demand.
- Rock splitting cylinders: Subdivision follows rock fabric, bedding, and joints.
- Concrete crushers: The bite grid structures selective removal and the exposure of reinforcement.
- Combination shears and Multi Cutters: Cutting grids for mixed concrete-and-steel components.
- Steel shears: Grid-based cutting sequence to control deformation and residual load-bearing capacity.
- Tank cutters: Segmentation into regular fields for safe dismantling of vessels.
- Hydraulic power units: Provide uniform drive to work through a defined grid swiftly and reproducibly.
Typical mistakes with the grid dimension and how to avoid them
- Grid too coarse: Incomplete crack linkage, uncontrolled breaks. Countermeasure: test field, densify spacing step by step.
- Grid too fine: Excessive cycle times, unnecessary wear. Countermeasure: optimize segment sizes for handling and material behavior.
- Insufficient edge distances: Edge breaks, crumbling. Countermeasure: increase minimum distances, provide starter notches or pilot holes.
- Ignoring reinforcement: Jammed tools, drift. Countermeasure: rebar detection and a drilling or bite grid adapted to the reinforcement layout.
- Wrong sequence: Premature loss of stability. Countermeasure: interlock the grid with load transfer and temporary supports.
Documentation and marking of the grid dimension
A grid only becomes effective through clear marking and disciplined execution. Axes, reference edges, and field numbers are transferred to the substrate. Visible markings, short cycle lengths, and a consistent sequence of work steps facilitate coordination between drilling crew, operators of concrete crushers, splitters, and cutting tools. Planning and approval should be carried out by qualified personnel; concrete limit and design values must always be specified project-specifically.
Application examples from the fields of use
Concrete demolition and specialized deconstruction
Drill-hole grids with spacing adapted to component thickness, combining splitting with subsequent crusher removal. Tighter grids in the area of nodes, anchor heads, and supports; larger fields in homogeneous slabs.
Strip-out and cutting
Bite and cutting grids for selective separation of non-loadbearing components, defined fields for controlled biting with concrete crushers, and a planned cutting sequence for steel parts using steel shears or Multi Cutters.
Rock demolition and tunneling
Hole grids along the design contour, adapted to jointing and stability. Splitting sequences produce calm contours and minimize vibrations in sensitive areas.
Natural stone extraction
Regular drill-hole grids parallel to natural bedding planes to free raw blocks with defined edge quality and limit breakage losses.
Special applications
Segmented cutting and splitting grids for complex geometries, limited access, or contaminated environments to minimize work steps and guide the material in a controlled manner.
Terminology and measurement practice
The grid dimension is to be distinguished from the axis dimension (center-to-center) and the nominal dimension (target without tolerance). For site practice, clear reference points, uniform measuring devices, and redundant checks have proven effective. Field sizes are consistently recorded, deviations documented, and grids refined as needed. This keeps quality, safety, and cadence consistent throughout the deconstruction or extraction process.