The dewatering borehole is a decisive work step in many construction and deconstruction projects to discharge groundwater and perched water in a controlled manner, lower pore water pressure, and relieve structural elements. Whether in rock excavation, tunnel construction, or concrete demolition and special deconstruction: well-planned dewatering increases stability, improves the workability of rock and concrete, and enables the efficient use of precise cutting and splitting techniques. In combination with solutions such as rock and concrete splitters, concrete demolition shears as well as hydraulic power units from Darda GmbH, interventions become more predictable and the quality of results increases.
Definition: What is meant by dewatering borehole
A dewatering borehole is a deliberately created borehole in soil, rock, or concrete structural elements that serves to remove water. The goal is to reduce hydrostatic pressure, collect inflows, discharge them via filter or drain pipes, or temporarily keep an excavation pit, a tunnel heading, or a deconstruction zone dry. Terms such as drainage borehole, relief borehole, dewatering borehole, or slope drainage are used synonymously. Depending on the task, vertical, inclined, or horizontal boreholes are executed with a filter gravel pack, filter pipe, and annular sealing; in rock, an open borehole often serves as a pressure-relieving seepage channel.
Function and objectives of the dewatering borehole
Dewatering boreholes intervene in the local water balance by deliberately creating water paths or actively pumping. They lower the water table (drawdown), relieve layers with perched-water pressure, or control inflows into structures. Typical objectives are: safe construction states, reduced erosion and piping risk, less uplift, lower moisture penetration, and better cutting quality. In rock masses, relief boreholes reduce pore and fracture water pressure. This makes the use of rock and concrete splitters more predictable, splitting joints run more stably, and the risk of uncontrolled spalling decreases. In concrete demolition, prior dewatering promotes dry fracture edges, allowing concrete demolition shears to grip more precisely and produce clean edges.
Methods and designs of dewatering boreholes
The choice of method depends on geology, groundwater conditions, the hydraulic conductivity coefficient (kf), and the project objective. In deconstruction and tunnel construction, the following variants are frequently used:
Vertical drawdown boreholes
They serve to locally lower groundwater or perched water. A borehole is fitted with a filter pipe, the annulus is backfilled with filter gravel, and sealed at the top. Pumps discharge water until the target water level is reached. In excavation pits, this allows control of the radius of influence and improves stability.
Inclined and horizontal drains
These boreholes are used in slopes, retaining structures, tunnel faces, and galleries. Their task is the pressure-relieving discharge of water along joint systems. Horizontal dewatering boreholes minimize inflows into the tunnel face and reduce washout of fine particles.
Relief boreholes in concrete and masonry
In massive components, behind water pressure or in water-bearing joints, small relief boreholes are created to gradually reduce backed-up pressure. Only then do separation works follow, for example with concrete demolition shears or compact splitting techniques, reducing the risk of sudden water discharges.
Combination with injections
In areas with strong inflow, boreholes are first used for dewatering and then consolidated or sealed with injection materials (e.g., suspension or gel injections). This allows seepage to be controlled and cut edges for the subsequent demolition to be stabilized.
Planning criteria and geotechnical fundamentals
Planning is based on hydrogeological investigations, pumping tests, and the assessment of joint systems. Important parameters are permeability, inflow rates, desired drawdown, radius of influence, and the service life of the borehole. During the project, water conditions are monitored, for example via observation wells, discharge volumes, and turbidity.
Hydraulics and influence on workability
As pore water pressure decreases, shear strength and friction along slip planes increase. This improves the predictability of splitting directions and removal behavior. For targeted separation of components, dewatering facilitates the use of rock and concrete splitters and creates better conditions for precise cuts with concrete demolition shears.
Workflow: from investigation to dewatering
A structured workflow ensures the effectiveness of the dewatering borehole and reduces project risks.
- Investigation: assessment of soil/rock, perched water, joint systems, and structural joints.
- Concept: definition of borehole position, inclination, depth, completion, filter gravel, sealing, pump technology.
- Execution: drilling, flushing or dry drilling, cleaning the borehole wall, completion with filter pipe.
- Connection: pump installation or gravity discharge; safe capture of the outlet.
- Monitoring: measuring water levels, discharge volume, turbidity; adjusting pump operation.
- Decommissioning or continuous operation: temporary or permanent drainage depending on the task.
Interfaces with demolition and cutting technology
In components that are damp or subjected to backed-up water, separation work can be performed more controllably after a dewatering borehole. In concrete demolition and special deconstruction, drawdown facilitates targeted crack initiation, reduces splash water and sludge, and improves visibility of separation joints. This relieves the subsequent steps with concrete demolition shears, Multi Cutters, or splitting cylinders. In rocky sections of tunnel construction, pressure relief often leads to fewer unplanned break events; splitters then set defined wedges more cleanly.
Hydraulic power packs and energy supply
Hydraulic power packs supply splitting and cutting tools evenly, which—after dewatering with stable ground conditions—leads to predictable cycle times. A harmonized work chain of drainage, separation cut, and demolition stabilizes processes and reduces downtime.
Typical application areas of the dewatering borehole
Dewatering boreholes are used in different project phases and application areas:
- Concrete demolition and special deconstruction: relieving voids, shafts, foundation bases, and water-bearing joints prior to the use of concrete demolition shears and stone splitting technology.
- Strip-out and cutting: drying of cutting areas, reduction of sludge and splashes, improvement of edge quality.
- Rock excavation and tunnel construction: horizontal drains ahead of the heading, reduction of fracture water; stable conditions for rock and concrete splitters.
- Natural stone extraction: relieving water-bearing joints for predictable extraction along natural weakness zones.
- Special applications: boreholes for short-term pressure relief in case of leaks, in hard-to-access niches, or with complex construction conditions.
Equipment and tool selection
The drilling technology is adapted to soil/rock, inflow, and space constraints. Flush drilling methods are suitable for loose layers; in hard rock, drilling hammers and core drilling technology are used. Filter pipes and filter gravels are selected according to grain-size distribution to ensure reliable water capture. For subsequent separation work, robust, well-controlled tools are required: rock and concrete splitters for defined crack guidance, concrete demolition shears for selective biting and stable edges; for reinforcing steel, steel shears or combination shears assist.
Logistics and water routing
Discharge must be routed to avoid erosion and retain sediments. Settling basins, filters, and clear separation of clean and contaminated water are proven measures. For the discharge of contaminated waters during deconstruction, the applicable regulations and local requirements apply; coordination with the competent authorities is advisable.
Quality assurance and monitoring
Monitoring points and observation wells are set up to ensure effectiveness. Discharge volumes, water levels, and turbidity provide indications of system development. Consistently high turbidity suggests mobilization of fines, to which one can respond with filter adjustments or reduced pump intensity. Documented operation makes it easier to later adjust the demolition sequence with concrete demolition shears or splitting tools.
Risks, occupational safety and environmental aspects
Dewatering boreholes affect the groundwater balance. Undesired drawdown in the surroundings and settlements must be avoided. Backflow, clogging of the filter zone, and uncontrolled erosion are also typical risks. Occupational safety focuses on splash protection, electrical safety for pumps, fall protection at drilling stations, and controlled handling of pressure relief. From an environmental perspective, sediment management, noise and dust reduction, and orderly discharge are key points.
Legal framework
Depending on the region, water law permits, notification, or approval procedures may be required. The applicable codes and recognized rules of technology are authoritative. Details must always be checked project-specifically; a binding case-by-case assessment is not provided here.
Practical tips for planning and execution
The following tips have proven effective in projects and support the interaction of dewatering with cutting and demolition technology:
- Define the drilling concept, pump capacity, and discharge routes early on.
- Carefully remove drill cuttings to avoid smearing the filter zone.
- Respond to measurements: adjust pump output stepwise, avoid pressure surges.
- Sequence dewatering and separation works: relieve pressure first, then cut/split.
- For reinforced concrete, after dewatering, expose reinforcement with steel shears before concrete demolition shears bite off the concrete.
- In rock, align drains to intersect natural joint systems; short, effective boreholes are often more efficient than a few long ones.
High-performance combination with products from Darda GmbH
Careful execution of a dewatering borehole creates the conditions for Darda GmbH equipment to realize its potential: rock and concrete splitters benefit from reduced water pressure, allowing splitting wedges to work more predictably. concrete demolition shears can engage more precisely on drier edges, with less flying debris and contamination. Hydraulic power packs supply the tools consistently; combination shears, steel shears, tank cutters, or Multi Cutters complement the chain when reinforcement, tanks, or hybrid constructions need to be separated. This creates a coherent workflow from dewatering to controlled removal.