Crusher Bucket for Excavators

Crusher buckets are excavator attachments for hydraulic excavators that crush mineral materials such as concrete, masonry, asphalt, or natural stone directly on the construction site. They combine the material handling of a bucket with the crushing function of a crusher. In concrete demolition and special deconstruction, in building gutting and cutting operations, as well as in rock excavation and tunnel construction, they enable short routes, reduced haulage, and immediate reuse as recycled construction material. In practice, crusher buckets are often combined with tools such as concrete demolition shears or stone and concrete splitting devices to separate reinforcement, pre-fracture components, and prepare the feed material for efficient, controlled crushing. Coordinated process chains can also be implemented in conjunction with hydraulic power units from Darda that supply the splitting tools.

Definition: What is meant by crusher bucket

A crusher bucket (often also called a jaw crusher bucket or crushing bucket) is a hydraulically driven excavator attachment whose bucket body contains a crushing chamber with one fixed and one moving jaw. Via an eccentric shaft or a toggle mechanism, the feed material is crushed in the wedge-shaped chamber. The adjustable gap setting defines the desired grain size. Typical feed materials, reinforced or unreinforced, include: concrete, reinforced concrete (after prior removal of the reinforcement), masonry, natural stone, and asphalt. Crusher buckets differ from screening buckets, which only classify, and from concrete pulverizers, which break components but do not granulate. They are suitable wherever local on-site recycling and flexible gradation bands are required.

Design and operating principle of crusher buckets

Crusher buckets consist of the bucket body with feed opening, a crushing chamber with wear-resistant jaw liners and side cheeks, a drive unit with eccentric shaft or kinematics, a gap adjustment mechanism, and hydraulic and optionally electrical components (e.g., for reverse run). The material is taken up with the bucket edge, guided into the crushing chamber, and repeatedly compressed between the fixed and moving jaw until it passes the set gap. A gap setting allows adaptation to target gradations; reverse mode and overload protection help with tramp iron or bridging. Water spray for dust suppression, magnets for steel separation, and pre-screens can be integrated or added.

Applications in concrete demolition, deconstruction, and natural stone

Crusher buckets are versatile and bridge the gap between handheld tools and mobile crushing plants:

Concrete demolition and special demolition: In selective deconstruction, floor slabs, decks, and walls can be processed to defined gradations after pre-breaking with concrete demolition shears. This reduces transports and enables direct use as base course or frost protection material.
Building gutting and cutting: After removing MEP installations and separating metal components with steel shears, multi cutters, or combination shears, the mineral core is crushed. Preparatory cuts accelerate material flow.
Rock excavation and tunnel construction: In sectional pits, confined areas, or at the tunnel face, oversized excavated rock can be quartered using hydraulic rock and concrete splitters and then reduced to size in the crusher bucket without setting up a separate crushing line.
Natural stone extraction: Offcuts and waste from stone processing are turned into secondary raw materials that can be reused in-house.
Special operations: In sensitive zones (city centers, near existing structures) crusher buckets enable targeted quantity control and minimize machine movements; noise and dust reduction can be managed via operating mode and auxiliary equipment.

Process chain: From demolition debris to RC material on site

The performance of a crusher bucket unfolds in a coordinated process chain aimed at material purity, safety, and consistent gradation.

Pre-selection and gutting: Remove non-mineral components. Perform cutting tasks with multi cutters, steel shears, or combination shears.
Pre-breaking: Open components with concrete demolition shears and expose reinforcement. For massive, thick-walled elements, use stone and concrete splitting devices; their power supply can be provided by hydraulic power packs from Darda GmbH.
Metal separation: Cut reinforcing steel with steel shears. This reduces contaminants and protects the crushing chamber.
Crushing in the bucket: Ensure even feeding, set the gap to the target gradation, monitor material flow; use reverse mode as needed.
Post-processing: Optional pre-screening or a second pass when a tighter gradation band is required.
Reuse: Use the recycled construction material as subbase, backfill material, or base course, provided material suitability and the recognized rules of the trade are met.

Selection criteria and sizing

The right configuration depends on the excavator, the material, and the target gradation. Key criteria:

Excavator size class and load capacity: Operating weight and boom geometry must match bucket weight and operating forces.
Hydraulics: Required flow and working pressure of the crusher bucket must harmonize with the carrier’s hydraulic system; observe oil return and return filtration.
Material type: Concrete strength, rock hardness, moisture, reinforcement content, and piece size affect throughput and wear.
Target gradation and band: Gap setting and crushing kinematics determine the share of oversize and fines.
Construction logistics: Consider space for stockpiles, dust and noise control, traffic routes, and disposal of contaminants (e.g., metal parts).
Environment: Observe requirements in city centers, special operations, or tunnel construction (ventilation, fire protection, escape routes).

Operation, safety, and occupational safety

Safe operation relies on solid organization and task-appropriate work procedures. Principles:

Secure the work area: Ensure safety distances, exclusion zones, and clear sightlines between the excavator operator and ground crew.
Load-bearing capacity and stability: Mind the ground, slopes, and crane/hoisting movements; do not exceed the excavator’s rated loads.
Dust and noise reduction: Water spray, adapted speeds, shielding; use personal protective equipment.
Contaminants: Remove reinforcement pieces, wood, or plastics in time; never reach into the running crushing chamber.
Authorization processes: Before starting work, conduct a briefing, function test (including emergency and reverse mode), and daily visual checks of hydraulic lines and fasteners.

Dust suppression and emissions

Water mist at the feed opening and stockpile reduces fine dust. A tuned idle/load operation lowers noise emissions; in tunnel construction, ventilation capacity must be adjusted.

Maintenance, wear, and service life

Crusher buckets operate under abrasive conditions. Regular care preserves performance and material quality:

Wear parts: Inspect jaw plates and side liners; rotate or replace in time.
Lubrication: Grease bearings per manufacturer specifications; avoid contamination by dust.
Hydraulics: Check lines, couplings, and filters; monitor oil temperature and cleanliness.
Gap setting: Check play, document calibration to secure reproducible gradation bands.
Structural checks: Look for cracks at welds, bucket floor, and adapter plate; retighten fastening bolts.

Advantages and limits compared with mobile or stationary crushing plants

Crusher buckets bridge a gap between handheld size-reduction methods and standalone crushers.

Advantages: High mobility, immediate recycling, reduced transports, flexible quantity control, short setup times, ideal for selective deconstruction and confined areas.
Limits: Lower throughput than standalone plants, sensitive to contaminants (reinforcement, wood), particle shape and gradation depend on gap and feeding, greater influence from operator technique and material variability.

Economics and environmental aspects

Economics result from fewer transports, lower disposal costs, and on-site use of RC material. Ecologically, CO₂ emissions and noise are reduced through short routes. Decisive factors are good purity, a suitable gradation for the intended use, and a plannable utilization within the site workflow.

Common pitfalls and practical tips

Uneven feeding: Leads to bridging or excess fines; keep material flow calm and continuous.
Incorrect gap setting: Too narrow increases wear and reduces throughput; too wide produces oversize. Align target gradation with intended reuse.
Insufficient contaminant control: Remove reinforcement beforehand with concrete demolition shears, steel shears, or combination shears; magnets support residual separation.
Lack of dust suppression: Plan water spray and stockpile management.
Neglected maintenance: Regular inspections prevent downtime and ensure consistent quality.

Combination with Darda GmbH tools in deconstruction

In many projects, an interlocked workflow proves effective: Concrete demolition shears open components and expose reinforcement; stone and concrete splitting devices divide massive elements with low vibration and define piece sizes; steel shears, multi cutters, and combination shears separate reinforcement and attachments so the crusher bucket receives clean, free-flowing feed material. Hydraulic power packs from Darda GmbH supply the splitting tools. This combination supports controlled processes in concrete demolition and special deconstruction, in building gutting and cutting, as well as in rock excavation and tunnel construction.

Technical parameters and settings

For reproducible results, technical settings should be documented and adapted to the material conditions:

Gap setting: Primary control for target gradation; periodic calibration against samples is useful.
Hydraulic flow: Throughput and jaw speed depend on oil delivery; observe throttles and priority valves.
Reverse mode: Activate briefly in case of blockages to clear bridges; prolonged running without material should be avoided.
Quick coupler compatibility: Check adapter geometry and clearances to prevent collisions with the boom/attachment.

Quality of the RC material and documentation

The recovered recycled construction material should be monitored for purity, particle size distribution, and suitability for the intended use. Common practice includes spot visual checks, simple gradation checks, and accompanying documentation of settings (e.g., gap setting, material origin, date). Legal and normative requirements may vary by region; authoritative are the recognized rules of the trade and the specifications of the respective construction project.

Use in tunnel construction and rock

In tunnel construction and rock work, the crusher bucket offers advantages where space and logistics are limited. Oversize can be selectively reduced with hydraulic wedge splitters, and the crushed material can serve as temporary haul road topping or backfill, provided suitability is confirmed. Dust, ventilation, and fire load must be given special consideration in enclosed spaces; even feeding and dust suppression are central here.