{"id":20065,"date":"2026-01-16T13:33:02","date_gmt":"2026-01-16T12:33:02","guid":{"rendered":"https:\/\/www.darda.de\/?page_id=20065"},"modified":"2026-06-10T16:10:04","modified_gmt":"2026-06-10T14:10:04","slug":"underpinning-grouting","status":"publish","type":"page","link":"https:\/\/www.darda.de\/en\/knowledge\/underpinning-grouting","title":{"rendered":"Underpinning grouting"},"content":{"rendered":"<div class=\"wissen-inhaltsbereich\">\n<p>Underpinning grouting is a proven <em>injection method<\/em> used in construction, refurbishment, and <em>special demolition<\/em> to fill voids, improve bearings, compensate settlements, or purposefully lift structural elements. In projects where hydraulic demolition tools such as <strong>concrete demolition shear<\/strong> or <a href=\"https:\/\/www.darda.de\/en\/product-overview\/hydraulic-rock-and-concrete-splitters\">hydraulic rock and concrete splitters<\/a> by Darda GmbH are used, underpinning grouting often serves for preparation, stabilization, or follow-up securing so that components can be processed in a controlled manner with low vibration levels. Proper sequencing minimizes collateral damage, optimizes load paths, and supports predictable work progress.<\/p>\n<h2>Definition: What is meant by underpinning grouting?<\/h2>\n<p>Underpinning grouting refers to the <strong>targeted injection<\/strong> of injection materials (for example cement suspensions, microcements, fine grout, or reactive <strong>injection resin<\/strong>) from below or from a lower level into voids, contact joints, and loose zones beneath slabs, foundations, walls, or bases. The aim is <em>cavity filling<\/em>, the restoration of <strong>load transfer<\/strong>, an increase in contact stiffness, the limited lifting of settled structural elements, as well as sealing against water or air flows. The method differs from underpinning (load-bearing auxiliary foundations) and from pure <em>crack injection<\/em> (local crack sealing), but it can be combined with both. Depending on the objective, it is also referred to in practice as <em>contact grouting<\/em> or <em>compensation grouting<\/em> when controlled lift is intended.<\/p>\n<h2>Practical relevance and typical applications<\/h2>\n<p>Underpinning grouting is used wherever load transfer is uncertain, voids are suspected, or components need to be realigned in a controlled way. Typical situations in the context of demolition, refurbishment, and tunnel construction:<\/p>\n<ul>\n<li>Compensation of settlements beneath floor slabs, <strong>machine foundation<\/strong>s, or stair bearings before precise <em>cutting<\/em> and <em>deconstruction<\/em> work.<\/li>\n<li>Contact and consolidation grouting below base slabs to improve overturning and <strong>shear strength<\/strong> prior to the use of concrete demolition shear.<\/li>\n<li>Filling voids after removing load-bearing or bracing elements before <strong>hydraulic wedge splitter<\/strong>s introduce splitting forces in a controlled manner.<\/li>\n<li>Sealing and backfilling in tunnel construction (for example under the invert or at connection joints) to reduce water paths and stabilize the lining.<\/li>\n<li>Stabilizing masonry bearings in existing buildings when openings are cut or components are deconstructed with concrete demolition shear.<\/li>\n<li>Staged stabilization beneath rails, crane runways, or machine lines to maintain alignment during partial deconstruction.<\/li>\n<\/ul>\n<p>In refurbishment, it also supports <em>selective load transfer<\/em> ahead of saw cutting and core drilling so that subsequent steps remain low vibration and predictable.<\/p>\n<h2>Process and technique of underpinning grouting<\/h2>\n<p>Planning and execution follow a systematic approach tailored to subsoil, structural element, and objectives. Crucial are the preliminary investigation, the selection of the injection material, the arrangement of boreholes, the control of pressure, and clearly defined acceptance and stop criteria.<\/p>\n<h3>Pre-investigation and objective definition<\/h3>\n<p>Before starting, subsoil and structural data are reviewed, voids are located (for example by probing or hammer sounding), and measurement points for settlement and lift control are installed. Where appropriate, non-destructive testing such as ground-penetrating radar, endoscopy, or ultrasonic echo is used to refine the target zones. It is defined whether underpinning grouting is primarily intended to <em>fill<\/em>, <em>densify<\/em>, <em>seal<\/em>, or <em>lift<\/em>.<\/p>\n<h3>Borehole pattern and packer arrangement<\/h3>\n<p>Boreholes are arranged in a grid or along lines. Packers are used to seal the injection path. Depth is based on the location of voids or the contact zone (for example underside of slabs, foundation base). For thin components, short, closely spaced boreholes are preferred to minimize bypass paths. Depending on geometry, angled drilling improves coverage, and single or double packers are selected to control lift and limit spread.<\/p>\n<h3>Injection materials<\/h3>\n<ul>\n<li><strong>Cement suspensions and fine grout<\/strong>: well-suited for cavity filling, load-bearing contact zones, economical and compatible with mineral building materials.<\/li>\n<li><strong>Microcements<\/strong>: for fine pores and dense materials; long pumpability, good penetration.<\/li>\n<li><strong>Injection resins<\/strong>: low viscosity, fast reaction, suitable for sealing or targeted lifting; use depends on environmental and fire protection requirements.<\/li>\n<li><strong>Thixotropic or slightly expanding systems<\/strong>: for controlled lift with reduced bleed and improved stability at joints and edges.<\/li>\n<\/ul>\n<h3>Pressure control and process monitoring<\/h3>\n<p>Injection is carried out in stages. <strong>Injection pressure<\/strong> and injected volume are continuously monitored. Criteria for switching or stopping include, for example, <em>refusal<\/em> (no further intake), reaching the pressure limit, the desired lift, or emergence at defined control points. Lifts are monitored geodetically in real time to avoid inadmissible deformations. Sequenced passes with rest times allow redistribution and reduce the risk of uncontrolled lifting.<\/p>\n<h3>Documentation<\/h3>\n<p>For verification and quality assurance, drilling logs, injected volumes, pressures, times, material batches, and measurement data are documented continuously. This facilitates parameter adjustments during execution. Material traceability and calibration records for gauges and pumps complement the documentation.<\/p>\n<h2>Interfaces with demolition methods and hydraulic tools<\/h2>\n<p>Underpinning grouting and <strong>hydraulic demolition tools<\/strong> interlock. A coordinated sequence reduces risks, prevents uncontrolled cracking, and improves occupational safety.<\/p>\n<ul>\n<li><strong>Before deploying concrete demolition shear<\/strong>: underpinning grouting stabilizes bearings and contact joints so that crushing and cutting forces are introduced in a controlled manner.<\/li>\n<li><strong>Accompanying the splitting technique<\/strong> with hydraulic wedge splitter: In areas with suspected voids, grouting is carried out in advance or in sections to secure load paths and avoid collateral breakage.<\/li>\n<li><strong>After deconstruction<\/strong>: Filling resulting voids prevents settlements of adjacent components and prepares follow-up measures (for example new bearings).<\/li>\n<li><strong>Hydraulic power pack<\/strong> supplies demolition tools efficiently and with low vibration; separate injection pumps are used for underpinning grouting. Workflows must be kept separate but coordinated in time and space.<\/li>\n<li><strong>Sequencing and access<\/strong>: separation of work zones, mock-up of the first sequence, and clear stop points enable tool operators and injection crews to work without interference.<\/li>\n<\/ul>\n<h2>Particularities in application areas<\/h2>\n<h3>Concrete demolition and special demolition<\/h3>\n<p>In selective deconstruction, underpinning grouting beneath slabs, platforms, and foundations reduces the risk of punching shear failures or unintended lifts. In combination with concrete demolition shear, components can be released section by section while underpinning grouting strengthens the remaining bearings. Temporary propping concepts are checked against the anticipated lift and stiffness gain.<\/p>\n<h3>Building gutting and cutting<\/h3>\n<p>When creating openings (for example door and <strong>ceiling opening<\/strong>s), underpinning grouting stabilizes bearing edges. This keeps cut joints clean and reduces unwanted crack propagation. Especially in confined conditions where hand-held tools and concrete demolition shear are used, this increases execution safety. Dust, noise, and vibration emissions remain low when lift is limited and pressure is controlled.<\/p>\n<h3>Rock excavation and tunnel construction<\/h3>\n<p>In drifts and tunnel bores, underpinning grouting supports the invert, fills voids, and reduces water paths. Before using splitters in rock, consolidating loosely deposited zones may be required so that splitting forces act where planned. These measures are common in <a href=\"https:\/\/www.darda.de\/en\/applications\/rock-demolition-and-tunnel-construction\">rock demolition and tunnel construction<\/a>. In the presence of water, materials with low washout tendency and rapid setting are prioritized.<\/p>\n<h3>Natural stone extraction<\/h3>\n<p>In the extraction and setting of massive <strong>natural stone<\/strong>, underpinning grouting in the bedding joint improves contact faces and closes local voids. This enables more precise splitting and protects edges from spalling. The approach supports dimensional accuracy for downstream processing and transport.<\/p>\n<h3>Special application<\/h3>\n<p>In damage cases (undercut voids, unexpected settlements), emergency grouting can mobilize structural reserves until further measures are implemented. Combining with quiet, low-vibration tools such as concrete demolition shear is particularly advantageous in vibration-sensitive environments. Clear escalation paths and stand-by materials reduce response times in acute scenarios.<\/p>\n<h2>Risks, limits, and quality assurance<\/h2>\n<p>The effectiveness of underpinning grouting depends on subsoil, pore structure, injection material, and process control. Potential risks are uncontrolled bypass paths, unintended lifting, material washout, or insufficient bonds. Prevention:<\/p>\n<ol>\n<li>Careful preliminary investigation and <strong>test borehole<\/strong>s.<\/li>\n<li>Stepwise pressure increase with limit values and measurement control.<\/li>\n<li>Graded particle-size or viscosity strategy (from low-viscosity to coarser systems).<\/li>\n<li>Geodetic monitoring of sensitive points during injection.<\/li>\n<li>Regrouting only after evaluating the first results.<\/li>\n<li>Control of bleed, shrinkage, and setting by mix design, admixtures, and temperature management.<\/li>\n<li>Containment and spill control with collection trays, wipers, and immediate sealing of unintended emergences.<\/li>\n<\/ol>\n<h2>Material selection and equipment<\/h2>\n<p>The choice of injection material depends on the objective (filling, sealing, lifting), temperature, moisture, and environmental requirements. Mineral systems are often the first choice for concrete and masonry. Reactive systems are used when very fine cracks, rapid curing, or high tightness are required. Execution requires injection pumps with adjustable delivery rate, packers, check valves, and measuring devices. <strong>Hydraulic power pack<\/strong> supplies concurrently used demolition tools such as concrete demolition shear or hydraulic wedge splitter; logistics must be planned so that trades do not impede each other. Proper mixers, agitators, filters, hose management, and calibrated manometers ensure stable delivery and reproducible results.<\/p>\n<h2>Planning, structural analysis, and cautions<\/h2>\n<p>Underpinning grouting affects load distribution and requires a <em>structural analysis<\/em>. Lifting measures must be small-dosed and closely monitored. Requirements from applicable standards and guidelines &#8211; especially regarding injection materials, occupational and environmental protection, and documentation &#8211; must be observed. Binding statements on load-bearing capacity may only be made as part of individual planning and assessment. Interface management with temporary supports and cut sequences is defined in method statements.<\/p>\n<h2>Measurement and monitoring methods<\/h2>\n<p>For quality assurance, measuring staffs, leveling, <strong>crack monitoring<\/strong>, and pressure logs have proven effective. For sensitive components, additional sensors (for example displacement measurement at bearing points) are used. The goal is to relate injected volumes, pressures, and deformations to demonstrate the success of underpinning grouting. Depending on sensitivity, tiltmeters, laser tracking, or fiber optic strain monitoring complement the setup for early detection of unwanted lift.<\/p>\n<h2>Sustainability and environmental aspects<\/h2>\n<p>Underpinning grouting is a <strong>low vibration levels<\/strong> method and can preserve components or enable their targeted deconstruction. In combination with quiet hydraulic tools (such as concrete demolition shear), emissions in existing buildings are reduced. The selection of injection materials should be based on environmental compatibility, recyclability, and the <strong>deconstruction concept<\/strong>; escaping material must be retained and disposed of professionally. Mix designs with reduced clinker content, low-VOC components, and documented environmental product data support a resource-efficient approach.<\/p>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>Underpinning grouting is a proven injection method used in construction, refurbishment, and special demolition to fill voids, improve bearings, compensate settlements, or purposefully lift structural elements. In projects where hydraulic demolition tools such as concrete demolition shear or hydraulic rock and concrete splitters by Darda GmbH are used, underpinning grouting <a class=\"moretag\" href=\"https:\/\/www.darda.de\/en\/knowledge\/underpinning-grouting\">read more&#8230;<\/a><\/p>\n","protected":false},"author":9,"featured_media":0,"parent":14846,"menu_order":0,"comment_status":"open","ping_status":"open","template":"tmpl\/template-wissen.php","meta":{"_acf_changed":false,"footnotes":"","_members_access_role":[],"_members_access_error":""},"class_list":["post-20065","page","type-page","status-publish","hentry"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.1 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Underpinning Grouting for Foundations &amp; Slabs<\/title>\n<meta name=\"description\" content=\"Discover Underpinning grouting for construction injection &amp; foundation stability \u2713 Void filling, sealing, lifting.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.darda.de\/en\/knowledge\/underpinning-grouting\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Underpinning Grouting for Foundations &amp; Slabs\" \/>\n<meta property=\"og:description\" content=\"Discover Underpinning grouting for construction injection &amp; foundation stability \u2713 Void filling, sealing, lifting.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.darda.de\/en\/knowledge\/underpinning-grouting\" \/>\n<meta property=\"og:site_name\" content=\"Darda GmbH\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/DardaDemolition\" \/>\n<meta property=\"article:modified_time\" content=\"2026-06-10T14:10:04+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"8 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/underpinning-grouting\",\"url\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/underpinning-grouting\",\"name\":\"Underpinning Grouting for Foundations & Slabs\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#website\"},\"datePublished\":\"2026-01-16T12:33:02+00:00\",\"dateModified\":\"2026-06-10T14:10:04+00:00\",\"description\":\"Discover Underpinning grouting for construction injection & foundation stability \u2713 Void filling, sealing, lifting.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/underpinning-grouting#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/underpinning-grouting\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/underpinning-grouting#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.darda.de\\\/en\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Knowledge\",\"item\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Underpinning grouting\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#website\",\"url\":\"https:\\\/\\\/www.darda.de\\\/en\",\"name\":\"Darda GmbH\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#organization\"},\"alternateName\":\"Abbruchwerkzeuge\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.darda.de\\\/en?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#organization\",\"name\":\"Darda GmbH\",\"url\":\"https:\\\/\\\/www.darda.de\\\/en\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.darda.de\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/android-icon-192x192-1.png\",\"contentUrl\":\"https:\\\/\\\/www.darda.de\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/android-icon-192x192-1.png\",\"width\":192,\"height\":192,\"caption\":\"Darda GmbH\"},\"image\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/DardaDemolition\",\"https:\\\/\\\/www.instagram.com\\\/darda_demolition\",\"https:\\\/\\\/www.youtube.com\\\/user\\\/DardaGmbH\",\"https:\\\/\\\/www.xing.com\\\/pages\\\/darda-gmbh\",\"https:\\\/\\\/de.linkedin.com\\\/company\\\/darda-gmbh\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Underpinning Grouting for Foundations & Slabs","description":"Discover Underpinning grouting for construction injection & foundation stability \u2713 Void filling, sealing, lifting.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.darda.de\/en\/knowledge\/underpinning-grouting","og_locale":"en_US","og_type":"article","og_title":"Underpinning Grouting for Foundations & Slabs","og_description":"Discover Underpinning grouting for construction injection & foundation stability \u2713 Void filling, sealing, lifting.","og_url":"https:\/\/www.darda.de\/en\/knowledge\/underpinning-grouting","og_site_name":"Darda GmbH","article_publisher":"https:\/\/www.facebook.com\/DardaDemolition","article_modified_time":"2026-06-10T14:10:04+00:00","twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"8 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.darda.de\/en\/knowledge\/underpinning-grouting","url":"https:\/\/www.darda.de\/en\/knowledge\/underpinning-grouting","name":"Underpinning Grouting for Foundations & Slabs","isPartOf":{"@id":"https:\/\/www.darda.de\/en#website"},"datePublished":"2026-01-16T12:33:02+00:00","dateModified":"2026-06-10T14:10:04+00:00","description":"Discover Underpinning grouting for construction injection & foundation stability \u2713 Void filling, sealing, lifting.","breadcrumb":{"@id":"https:\/\/www.darda.de\/en\/knowledge\/underpinning-grouting#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.darda.de\/en\/knowledge\/underpinning-grouting"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.darda.de\/en\/knowledge\/underpinning-grouting#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.darda.de\/en"},{"@type":"ListItem","position":2,"name":"Knowledge","item":"https:\/\/www.darda.de\/en\/knowledge"},{"@type":"ListItem","position":3,"name":"Underpinning grouting"}]},{"@type":"WebSite","@id":"https:\/\/www.darda.de\/en#website","url":"https:\/\/www.darda.de\/en","name":"Darda GmbH","description":"","publisher":{"@id":"https:\/\/www.darda.de\/en#organization"},"alternateName":"Abbruchwerkzeuge","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.darda.de\/en?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.darda.de\/en#organization","name":"Darda GmbH","url":"https:\/\/www.darda.de\/en","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.darda.de\/en#\/schema\/logo\/image\/","url":"https:\/\/www.darda.de\/wp-content\/uploads\/2017\/09\/android-icon-192x192-1.png","contentUrl":"https:\/\/www.darda.de\/wp-content\/uploads\/2017\/09\/android-icon-192x192-1.png","width":192,"height":192,"caption":"Darda GmbH"},"image":{"@id":"https:\/\/www.darda.de\/en#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/DardaDemolition","https:\/\/www.instagram.com\/darda_demolition","https:\/\/www.youtube.com\/user\/DardaGmbH","https:\/\/www.xing.com\/pages\/darda-gmbh","https:\/\/de.linkedin.com\/company\/darda-gmbh"]}]}},"_links":{"self":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/20065","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/users\/9"}],"replies":[{"embeddable":true,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/comments?post=20065"}],"version-history":[{"count":2,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/20065\/revisions"}],"predecessor-version":[{"id":28227,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/20065\/revisions\/28227"}],"up":[{"embeddable":true,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/14846"}],"wp:attachment":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/media?parent=20065"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}