{"id":19846,"date":"2025-12-25T13:31:49","date_gmt":"2025-12-25T12:31:49","guid":{"rendered":"https:\/\/www.darda.de\/?page_id=19846"},"modified":"2025-12-25T13:31:49","modified_gmt":"2025-12-25T12:31:49","slug":"blasting-permit","status":"publish","type":"page","link":"https:\/\/www.darda.de\/en\/knowledge\/blasting-permit","title":{"rendered":"Blasting permit"},"content":{"rendered":"<div class=\"wissen-inhaltsbereich\">\n<p>The blasting permit is a central topic in many construction and deconstruction projects. It determines whether rock, concrete, or steel may be removed by blasting works\u2014or whether low-vibration alternative methods must be used. Balancing safety, emissions control, and scheduling, the permit influences the choice of work method, technical workflows, and the integration of tools such as <strong>concrete demolition shear<\/strong> and <a href=\"https:\/\/www.darda.de\/en\/product-overview\/hydraulic-rock-and-concrete-splitters\">hydraulic rock and concrete splitters<\/a> from Darda GmbH. This article classifies the term technically, describes the usual process up to issuance, shows typical conditions, and explains the link to proven non-explosive methods that play a key role in concrete demolition, rock excavation, tunnel construction, and selective dismantling.<\/p>\n<h2>Definition: What is meant by a blasting permit<\/h2>\n<p>A blasting permit is the official authorization to carry out blasting works within a specifically defined project area and time frame. It is typically subject to conditions concerning personnel qualifications, work procedures, safety distance, monitoring measures, and the protection of people, structures, and the environment. The blasting permit differs from personal certifications (e.g., qualifications for licensed blasters): it does not refer to the person but to the <em>project<\/em> and its framework conditions. It often includes a blasting plan and safety plan, a hazard analysis, and forecasts for vibrations, airborne sound, and dust. Depending on the region and project type, the decision is made by the competent authority after reviewing the documentation and, if necessary, after a site visit.<\/p>\n<h2>Legal framework and responsibilities<\/h2>\n<p>Requirements for blasting works are regulated in Germany by explosives legislation and supplementary regulations; other countries have their own, sometimes comparable, rules. Depending on the federal state and project type, different authorities are responsible (e.g., occupational safety inspectorates, mining authorities, or municipal bodies). In sensitive areas\u2014such as densely built urban zones, near protected structures, or in water protection areas\u2014higher standards are applied to proof and monitoring.<\/p>\n<p>In practice, a distinction must be made between personal qualifications (required for carrying out blasting works) and the <strong>project-specific permit<\/strong>. The permit may include conditions stipulating specific measures and alternative methods as soon as forecast values (for example permissible vibration limits) would be exceeded. In such cases, <strong>concrete demolition shear<\/strong> or <strong>hydraulic splitter<\/strong> from Darda GmbH are often used as low-vibration solutions, either as a supplement to blasting or as a complete replacement.<\/p>\n<h2>When is a blasting permit required?<\/h2>\n<p>A blasting permit is regularly required when explosives are to be used for the removal of rock or concrete as well as for the controlled demolition of structures. This includes, among other things:<\/p>\n<ul>\n<li>Rock excavation in bedrock, for example for route clearance or in slope stabilization zones<\/li>\n<li>Drill-and-blast tunnel heading or breakthrough in conventional methods<\/li>\n<li>Controlled blasting of foundations, piers, massive concrete bodies, or structural segments<\/li>\n<li>Building demolition by blasting under defined tipping or fall direction mechanisms<\/li>\n<\/ul>\n<p>No blasting permit is needed if <em>no explosives<\/em> are used. In numerous projects, therefore, <strong>hydraulic methods<\/strong> are used\u2014for example <strong>hydraulic splitter<\/strong> and <strong>concrete demolition shear<\/strong> from Darda GmbH. These allow concrete structures and rock blocks to be separated in a controlled, low-vibration, and precise manner. In urban settings, near sensitive facilities, or under strict immission requirements, these methods are often the first choice.<\/p>\n<h2>Process up to the permit: from concept to conditions<\/h2>\n<ol>\n<li>Preliminary inquiry and project outline: Clarify whether blasting works appear fundamentally permissible and what documents are expected.<\/li>\n<li>Hazard analysis: Systematic assessment of risks to people, neighboring buildings, infrastructure, and the environment.<\/li>\n<li>Blasting and safety plan: Description of the procedure, safety distance, cordons, warning and evacuation concepts, and communication channels.<\/li>\n<li>Immission forecast: Calculation or expert assessment of vibrations, airborne sound, flyrock, and dust; proof of covers and protective berms if needed.<\/li>\n<li>Qualification and suitability evidence: Appointment of responsible persons, proof of qualifications, and information on storage and transport of explosives.<\/li>\n<li>Authority review and conditions: Definition of time windows, measurement and monitoring obligations, and substitute methods for sensitive areas.<\/li>\n<li>Construction site preparation: Set-up of measurement points, crack monitoring, protective measures; information to affected parties.<\/li>\n<li>Execution and documentation: Compliance with conditions, measurement logs, deviation management, and final report.<\/li>\n<\/ol>\n<h2>Safety and environmental protection in focus<\/h2>\n<p>The blasting permit focuses on the <strong>protection of people<\/strong>, the <strong>protection of property<\/strong>, and <strong>environmental protection<\/strong>. Typical topics are:<\/p>\n<ul>\n<li>Vibrations and airborne sound: forecast, limit values, monitoring, adjustment of charge sizes.<\/li>\n<li>Rockfall and fragments: covers, protective berms, safety distance, temporary closures.<\/li>\n<li>Dust and emissions: wetting, dust extraction plant, targeted sequencing of work steps.<\/li>\n<li>Water and soil protection: handling contaminated sites, preventing inputs.<\/li>\n<li>Compatibility with neighbors and infrastructure: information, time windows, utility records and safeguards.<\/li>\n<\/ul>\n<p>Where forecasts approach permissible limits, <em>hybrid methods<\/em> are often approved: selective mechanical separation with <strong>concrete demolition shear<\/strong>, pre-weakening using <strong>hydraulic splitter<\/strong>, and limited, small charges in less critical areas. This avoids peak loads and ensures compliance with conditions.<\/p>\n<h2>Alternatives and complements to blasting<\/h2>\n<p>Permitting practice rewards methods that reduce risk and protect the environment. Mechanical, hydraulic, and thermal methods are therefore often used as alternatives or complements to blasting:<\/p>\n<ul>\n<li><strong>Hydraulic splitter<\/strong>: Local spreading in pre-drilled holes generates high splitting forces in the component. The method is low-vibration and suitable for massive foundations, bridge bearings, and compact rock.<\/li>\n<li><strong>Concrete demolition shear<\/strong>: Precise crushing of concrete while simultaneously exposing the reinforcement for subsequent steel cutting. Particularly effective for selective deconstruction and in noise-sensitive environments.<\/li>\n<li>Additional Darda GmbH tools for combined use: <em>combination shears<\/em>, <em>Multi Cutters<\/em>, and <em>steel shears<\/em> for reinforcement and profiles; <em>tank cutter<\/em> for special dismantling tasks; <em>hydraulic power packs<\/em> as the energy source for mobile, modular applications.<\/li>\n<\/ul>\n<p>The choice between blasting and alternatives depends on the structural system, component thicknesses, accessibility, vibration restrictions, schedule, and disposal concept. Often the combination is most economical: mechanical pre-weakening followed by blasting to free small segments\u2014or vice versa.<\/p>\n<h2>Application areas: permitting obligations in practice<\/h2>\n<h3>Concrete demolition and special deconstruction<\/h3>\n<p>In urban deconstruction, immission control and dense neighboring development are paramount. A blasting permit is often granted in such locations only under strict conditions. <strong>Concrete demolition shear<\/strong> allows selective removal floor by floor, while <strong>hydraulic splitter<\/strong> opens massive elements in a controlled way. <em>Combination shears<\/em> and <em>steel shears<\/em> cut reinforcement and profiles in defined sequences.<\/p>\n<h3>Strip-out and cutting<\/h3>\n<p>For strip-out, separating beams, and cutting complex components, a blasting permit is regularly not the appropriate route. Mechanical methods\u2014e.g., with <em>Multi Cutters<\/em> and <em>combination shears<\/em>\u2014are precise, predictable, and legally uncritical indoors. Blasting measures, if permitted at all, are limited to exterior, easily shielded segments.<\/p>\n<h3>Rock excavation and tunnel construction<\/h3>\n<p>In tunnel heading and rock excavation, blasting works are common. Nevertheless, in jointed rock or near sensitive structures, <strong>hydraulic splitter<\/strong> is frequently used to avoid vibration peaks. Permits often specify monitoring networks and adaptive charge sizes; where forecasts are critical, a condition to prefer hydraulic splitting may apply.<\/p>\n<h3>Natural stone extraction<\/h3>\n<p>In quarries, the permit depends heavily on geology, landscape protection, and logistics. For producing natural stone slabs, a gentle, low-crack release is crucial\u2014hydraulic splitting plays an important role to avoid quality losses. Blasting is used in a targeted and restrained manner.<\/p>\n<h3>Special applications<\/h3>\n<p>For special tasks\u2014e.g., in facilities with increased protection needs, in contaminated sites, or near critical infrastructure\u2014permitting authorities often prefer <strong>low-vibration<\/strong> methods. Tools such as <em>tank cutter<\/em>, <em>steel shears<\/em>, and <strong>concrete demolition shear<\/strong> from Darda GmbH enable controlled, step-by-step work without blasting-induced vibrations.<\/p>\n<h2>Typical conditions of the blasting permit<\/h2>\n<ul>\n<li><strong>Time windows and coordination:<\/strong> Defined blasting times, information to residents, closure periods with traffic management.<\/li>\n<li><strong>Measurement and monitoring concept:<\/strong> Vibration and airborne sound measurements, crack monitoring, documented limit checks.<\/li>\n<li><strong>Safety distances and protective measures:<\/strong> Cordons, covers, visual screens, sentries with communication devices.<\/li>\n<li><strong>Qualification and personnel:<\/strong> Appointment of responsible persons, team briefing, emergency and retreat routes.<\/li>\n<li><strong>Alternative and supplementary methods:<\/strong> Requirement to switch to <strong>concrete demolition shear<\/strong> or <strong>hydraulic splitter<\/strong> under risk constellations.<\/li>\n<li><strong>Documentation:<\/strong> Blasting notices, logs, deviation reports, final documents.<\/li>\n<\/ul>\n<h2>Decision support: blasting or hydraulic method?<\/h2>\n<p>Transparent weighing of options facilitates permitability and construction planning. Key criteria are:<\/p>\n<ul>\n<li><strong>Surroundings:<\/strong> Distances to protected structures, presence of people, utilities, and installations.<\/li>\n<li><strong>Structural element\/rock:<\/strong> Thickness, reinforcement ratio, jointing, homogeneity, accessibility.<\/li>\n<li><strong>Immissions:<\/strong> Forecasts for vibration and airborne sound, dust generation, requirements for dust and noise reduction.<\/li>\n<li><strong>Schedule and logistics:<\/strong> Phasing, material removal, transport routes, disposal.<\/li>\n<li><strong>Qualification and equipment fleet:<\/strong> Availability of licensed blasters and of hydraulic tools such as <strong>concrete demolition shear<\/strong> and <strong>hydraulic splitter<\/strong>; required <em>hydraulic power packs<\/em>.<\/li>\n<\/ul>\n<h2>Documentation, monitoring, and quality assurance<\/h2>\n<p>Fulfilling permit conditions requires seamless documentation. This usually includes:<\/p>\n<ul>\n<li>Measurement reports (vibration, airborne sound), calibration, and locations of sensors<\/li>\n<li>Photo documentation, crack maps, and target\u2013actual comparisons<\/li>\n<li>Logs covering closures, warning signals, and evacuations<\/li>\n<li>Evidence of the methods used and any switchovers to <strong>concrete demolition shear<\/strong> or <strong>hydraulic splitter<\/strong><\/li>\n<\/ul>\n<p>Careful quality assurance serves both compliance and traceability vis-\u00e0-vis clients and authorities. This applies equally to blasting and hydraulic methods.<\/p>\n<h2>Practical recommendations for planning and application<\/h2>\n<ol>\n<li><strong>Coordinate early:<\/strong> Seek an initial meeting with the authority, clarify the framework, initiate alternatives.<\/li>\n<li><strong>Expert forecasts:<\/strong> Multi-stage assessments with variant comparisons (blasting vs. hydraulic splitting, use of <strong>concrete demolition shear<\/strong>).<\/li>\n<li><strong>Plan a hybrid concept:<\/strong> Define clear switching criteria already in the application (e.g., approaching limits) to avoid delays.<\/li>\n<li><strong>Segment according to the component:<\/strong> Pre-divide into removable units; plan reinforcement cutting (e.g., with <em>steel shears<\/em> or <em>Multi Cutters<\/em>).<\/li>\n<li><strong>Communication and acceptance:<\/strong> Inform affected parties, adjust time slots, explain visual and dust protection.<\/li>\n<li><strong>Logistics and power supply:<\/strong> Size sufficient <em>hydraulic power packs<\/em>; secure material flow, intermediate storage, and disposal.<\/li>\n<\/ol>\n<h2>Role of equipment selection in the permitting process<\/h2>\n<p>The choice of tools has a decisive impact on permitability. <strong>Concrete demolition shear<\/strong> reduces impact and vibration peaks, <strong>hydraulic splitter<\/strong> minimizes vibrations in massive elements. <em>Combination shears<\/em> and <em>Multi Cutters<\/em> structure deconstruction into manageable steps, <em>steel shears<\/em> make cutting profiles safe, and <em>tank cutter<\/em> enables special dismantling without explosives. Providing suitable <a href=\"https:\/\/www.darda.de\/en\/product-overview\/hydraulic-power-units\">hydraulic power units<\/a> ensures continuous, mobile energy supply\u2014an aspect to be considered in safety and workflow plans.<\/p>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>The blasting permit is a central topic in many construction and deconstruction projects. It determines whether rock, concrete, or steel may be removed by blasting works\u2014or whether low-vibration alternative methods must be used. Balancing safety, emissions control, and scheduling, the permit influences the choice of work method, technical workflows, and <a class=\"moretag\" href=\"https:\/\/www.darda.de\/en\/knowledge\/blasting-permit\">read more&#8230;<\/a><\/p>\n","protected":false},"author":9,"featured_media":0,"parent":14846,"menu_order":0,"comment_status":"open","ping_status":"open","template":"tmpl\/template-wissen.php","meta":{"_acf_changed":false,"footnotes":""},"class_list":["post-19846","page","type-page","status-publish","hentry"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.4 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Blasting Permit for Construction &amp; Demolition<\/title>\n<meta name=\"description\" content=\"Construction blasting permits explained \u2713 explosives rules, safety, permitting steps, monitoring, low vibration options.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.darda.de\/en\/knowledge\/blasting-permit\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Blasting Permit for Construction &amp; Demolition\" \/>\n<meta property=\"og:description\" content=\"Construction blasting permits explained \u2713 explosives rules, safety, permitting steps, monitoring, low vibration options.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.darda.de\/en\/knowledge\/blasting-permit\" \/>\n<meta property=\"og:site_name\" content=\"Darda GmbH\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/DardaDemolition\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"8 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/blasting-permit\",\"url\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/blasting-permit\",\"name\":\"Blasting Permit for Construction & Demolition\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#website\"},\"datePublished\":\"2025-12-25T12:31:49+00:00\",\"description\":\"Construction blasting permits explained \u2713 explosives rules, safety, permitting steps, monitoring, low vibration options.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/blasting-permit#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/blasting-permit\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/blasting-permit#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.darda.de\\\/en\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Knowledge\",\"item\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Blasting permit\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#website\",\"url\":\"https:\\\/\\\/www.darda.de\\\/en\",\"name\":\"Darda GmbH\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#organization\"},\"alternateName\":\"Abbruchwerkzeuge\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.darda.de\\\/en?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#organization\",\"name\":\"Darda GmbH\",\"url\":\"https:\\\/\\\/www.darda.de\\\/en\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.darda.de\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/android-icon-192x192-1.png\",\"contentUrl\":\"https:\\\/\\\/www.darda.de\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/android-icon-192x192-1.png\",\"width\":192,\"height\":192,\"caption\":\"Darda GmbH\"},\"image\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/DardaDemolition\",\"https:\\\/\\\/www.instagram.com\\\/darda_demolition\",\"https:\\\/\\\/www.youtube.com\\\/user\\\/DardaGmbH\",\"https:\\\/\\\/www.xing.com\\\/pages\\\/darda-gmbh\",\"https:\\\/\\\/de.linkedin.com\\\/company\\\/darda-gmbh\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Blasting Permit for Construction & Demolition","description":"Construction blasting permits explained \u2713 explosives rules, safety, permitting steps, monitoring, low vibration options.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.darda.de\/en\/knowledge\/blasting-permit","og_locale":"en_US","og_type":"article","og_title":"Blasting Permit for Construction & Demolition","og_description":"Construction blasting permits explained \u2713 explosives rules, safety, permitting steps, monitoring, low vibration options.","og_url":"https:\/\/www.darda.de\/en\/knowledge\/blasting-permit","og_site_name":"Darda GmbH","article_publisher":"https:\/\/www.facebook.com\/DardaDemolition","twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"8 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.darda.de\/en\/knowledge\/blasting-permit","url":"https:\/\/www.darda.de\/en\/knowledge\/blasting-permit","name":"Blasting Permit for Construction & Demolition","isPartOf":{"@id":"https:\/\/www.darda.de\/en#website"},"datePublished":"2025-12-25T12:31:49+00:00","description":"Construction blasting permits explained \u2713 explosives rules, safety, permitting steps, monitoring, low vibration options.","breadcrumb":{"@id":"https:\/\/www.darda.de\/en\/knowledge\/blasting-permit#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.darda.de\/en\/knowledge\/blasting-permit"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.darda.de\/en\/knowledge\/blasting-permit#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.darda.de\/en"},{"@type":"ListItem","position":2,"name":"Knowledge","item":"https:\/\/www.darda.de\/en\/knowledge"},{"@type":"ListItem","position":3,"name":"Blasting permit"}]},{"@type":"WebSite","@id":"https:\/\/www.darda.de\/en#website","url":"https:\/\/www.darda.de\/en","name":"Darda GmbH","description":"","publisher":{"@id":"https:\/\/www.darda.de\/en#organization"},"alternateName":"Abbruchwerkzeuge","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.darda.de\/en?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.darda.de\/en#organization","name":"Darda GmbH","url":"https:\/\/www.darda.de\/en","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.darda.de\/en#\/schema\/logo\/image\/","url":"https:\/\/www.darda.de\/wp-content\/uploads\/2017\/09\/android-icon-192x192-1.png","contentUrl":"https:\/\/www.darda.de\/wp-content\/uploads\/2017\/09\/android-icon-192x192-1.png","width":192,"height":192,"caption":"Darda GmbH"},"image":{"@id":"https:\/\/www.darda.de\/en#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/DardaDemolition","https:\/\/www.instagram.com\/darda_demolition","https:\/\/www.youtube.com\/user\/DardaGmbH","https:\/\/www.xing.com\/pages\/darda-gmbh","https:\/\/de.linkedin.com\/company\/darda-gmbh"]}]}},"_links":{"self":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/19846","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/users\/9"}],"replies":[{"embeddable":true,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/comments?post=19846"}],"version-history":[{"count":1,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/19846\/revisions"}],"predecessor-version":[{"id":21397,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/19846\/revisions\/21397"}],"up":[{"embeddable":true,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/14846"}],"wp:attachment":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/media?parent=19846"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}