{"id":19523,"date":"2025-11-19T11:22:58","date_gmt":"2025-11-19T10:22:58","guid":{"rendered":"https:\/\/www.darda.de\/?page_id=19523"},"modified":"2026-05-02T11:10:03","modified_gmt":"2026-05-02T09:10:03","slug":"pile-driver","status":"publish","type":"page","link":"https:\/\/www.darda.de\/en\/knowledge\/pile-driver","title":{"rendered":"Pile driver"},"content":{"rendered":"<div class=\"wissen-inhaltsbereich\">\n<p>Pile drivers are key equipment in special foundation engineering when loads must be permanently transferred into bearing soil layers or when excavation pits need to be secured. They drive piles or sheet piles into the ground by impact, vibration, or pressing. In practice, the topic is not limited to new construction: during deconstruction of foundations, pile head treatment, and exposing reinforcement, complementary tools are frequently used. These include, in particular, <strong>concrete pulverizers<\/strong> as well as <strong><a href=\"https:\/\/www.darda.de\/en\/product-overview\/hydraulic-rock-and-concrete-splitters\">hydraulic rock and concrete splitters<\/a><\/strong> from Darda GmbH, which enable controlled, low-vibration work when trimming pile heads or selectively exposing pile groups.<\/p>\n<p>In addition to installation performance, modern driving works emphasize <strong>process reliability<\/strong>, <strong>measurable proof of capacity<\/strong>, and <em>low-noise, low-vibration<\/em> execution. Typical project targets include verified embedment depth, target blow count or vibration parameters, and minimal impact on adjacent structures and utilities.<\/p>\n<h2>Definition: What is meant by a pile driver?<\/h2>\n<p>A pile driver is a driving device that installs piles, sheet pile walls, or steel pipes into the ground through energy input. The energy input typically occurs by impact (hydraulic or diesel impact hammers), by vibration (vibratory pile drivers), or by static pressing. The goal is to create a pile foundation or a temporary or permanent excavation support. Unlike drilling methods, the pile driver achieves penetration of the pile without prior soil removal. Pile drivers are operated on cranes, carrier machines, or excavators and are used from hydraulic engineering to inner-city construction projects.<\/p>\n<h2>How it works and types of pile drivers<\/h2>\n<p>The choice of driving principle depends on subsoil, pile type, noise control, vibration requirements, and site constraints. The key is to achieve the required embedment depth and load-bearing capacity with minimal environmental impact.<\/p>\n<ul>\n<li><strong>Impact<\/strong>: displacement and densification effects, high energy per blow, pronounced noise emissions without mitigation.<\/li>\n<li><strong>Vibration<\/strong>: reduction of shaft friction by oscillation, efficient in granular soils, attention to resonance and building response.<\/li>\n<li><strong>Press-in<\/strong>: continuous static force, very low emissions, dependent on sufficient reaction forces and logistics.<\/li>\n<\/ul>\n<h3>Impact pile drivers<\/h3>\n<p>Impact pile drivers transfer energy in the form of individual blows. Hydraulic hammers allow precise adjustment of blow energy and blow rate. Diesel hammers are robust and deliver high energies, but are used less frequently where strict emission limits apply. Impact systems are suitable for <em>full displacement piles<\/em>, steel pipes, and precast concrete piles. <em>Pile cushions, noise shrouds, and optimized anvil systems<\/em> can reduce peak noise and protect pile heads. Drive refusal and set per blow are monitored to verify bearing.<\/p>\n<h3>Vibratory pile drivers<\/h3>\n<p>Vibratory pile drivers generate high-frequency oscillations that reduce shaft friction and thereby facilitate the installation of sheet piles, steel sections, or pipes. They are fast, but their effectiveness depends on ground conditions and vibration limits. With resonance frequency management, emissions can be reduced. Variable moment and resonance-free start-stop strategies help to minimize transmission into the surroundings, especially in sensitive urban contexts and near infrastructure.<\/p>\n<h3>Press-in and static systems<\/h3>\n<p>Hydraulic presses push piles into the ground using continuous, low-vibration forces. This is advantageous in sensitive urban areas, but more complex in logistics and dependent on the reaction force of adjacent structural elements. Ground heave and settlement must be observed; where required, temporary reaction piles or existing structures provide counterforce, and force-displacement curves document capacity development.<\/p>\n<h3>Carrier machines and attachments<\/h3>\n<p>Pile drivers can be standalone devices or attachments on excavators and crawler cranes. Important parameters include drive power, mass ratio, boom reach, guiding systems, and the ability to reduce vibration and noise. Compatible clamping systems and reliable alignment guides are crucial for accuracy; instrumentation for energy, frequency, and displacement supports documentation and quality assurance.<\/p>\n<h2>Pile types and materials<\/h2>\n<p>The pile driver must match the pile. Typical pile and wall types include:<\/p>\n<ul>\n<li>Timber piles for light to medium loads and temporary purposes<\/li>\n<li>Steel pipes and H-sections for high loads and offshore\/waterfront areas<\/li>\n<li>Sheet piles for excavation pit enclosure and shoreline protection<\/li>\n<li>Precast concrete piles for reproducible quality and fast installation<\/li>\n<li>Cast-in-place piles (casing installed, then concreted) with pile head trimming<\/li>\n<li>Micropiles where space is limited and for underpinning<\/li>\n<\/ul>\n<p>Choice of material and cross-section determines the driving method, corrosion protection, trimming techniques, and later deconstruction strategies. For steel, coatings and sacrificial thickness influence service life; for sheet piles, interlock sealing and joint integrity affect watertightness and extraction behavior.<\/p>\n<h2>Applications in construction<\/h2>\n<p>Pile drivers are used wherever near-surface soil layers cannot safely carry loads or excavation pits must be secured against water and earth pressure. This includes foundations for building and civil engineering structures, waterfront and hydraulic engineering, temporary excavation enclosures, bridge construction, and foundation improvement. In rock excavation and tunneling, sheet pile walls and steel pipes serve as auxiliary measures; in urban environments, low-vibration methods and coordinated logistics are essential. Time-critical works benefit from preplanned sequences and verified target parameters to reduce standstill and rework.<\/p>\n<h2>Pile head treatment, deconstruction, and complementary tools<\/h2>\n<p>After installation, pile heads are often trimmed to a defined elevation to connect the superstructure. During deconstruction of existing foundations, piles must be cut, exposed, or completely removed. Controlled methods are required here that account for structural analysis, neighboring structures, and emission limits. Dust suppression, protection of adjacent components, and safeguarding existing reinforcement laps form part of a robust method statement.<\/p>\n<h3>Pile head trimming on cast-in-place and precast piles<\/h3>\n<p><strong>Concrete pulverizers<\/strong> enable selective removal of the pile head with low vibration and reduced crack formation. They are suitable for gently exposing reinforcement. <strong>Hydraulic splitters<\/strong> create defined crack lines; the concrete can be released in a targeted manner along the split joints. In combination with <em><a href=\"https:\/\/www.darda.de\/en\/product-overview\/hydraulic-power-units\">compact hydraulic power units<\/a><\/em> from Darda GmbH, mobile, quiet operation in confined areas is possible. The objective is a plane, sound bearing surface with undamaged bars and sufficient bond length for subsequent structural connections.<\/p>\n<h3>Steel pipes, H-sections, and sheet piles<\/h3>\n<p>When trimming or segmenting steel sections, <strong><a href=\"https:\/\/www.darda.de\/en\/product-overview\/steel-shears\">Steel shears<\/a><\/strong> and <em>combination shears<\/em> are used to cut profiles and mixed assemblies. For thick-walled cross-sections or hard-to-reach areas, <em>multi cutters<\/em> can accelerate separation. Clean cut lines facilitate extraction, pulling, or safe backfilling of remaining segments. Orientation of cut lines and staged lifting reduce residual stresses and unplanned movements during removal.<\/p>\n<h3>Pile bundles and bored pile walls<\/h3>\n<p>For pile groups or pile walls, a stepwise exposure is advisable. Here, <strong>concrete pulverizers<\/strong> and <strong>hydraulic splitters<\/strong> support controlled removal rates, especially where adjacent structural elements or installations must be protected. Sequential work zones and intermediate stabilizations avoid overbreak and preserve alignment of the excavation face.<\/p>\n<h2>Occupational safety, emissions, and permits<\/h2>\n<p>Driving works are subject to strict requirements for noise, vibration, dust, and water protection. Requirements vary regionally; general rules of the art and regulatory stipulations apply. Early coordination with permitting authorities and neighbors is advisable.<\/p>\n<ul>\n<li>Noise control: enclosures, noise barrier walls, adjusted operating hours<\/li>\n<li>Vibrations: monitoring, adjusting impact energy, or switching to vibratory\/press-in methods<\/li>\n<li>Dust and particulates: wetting, sectional working, clean separation cuts<\/li>\n<li>Water protection: sealing, catch systems, proper disposal of flushing and residual materials<\/li>\n<li>Personal protective equipment: hearing protection, safety glasses, gloves, cut protection for shear work<\/li>\n<li>Process safety: utility detection and exclusion zones, lifting plans, and hot-work permits where applicable<\/li>\n<\/ul>\n<p>Underwater, additional measures to reduce sound emissions may be required. This may include bubble curtains, timing windows for sensitive fauna, and adapted driving parameters with continuous monitoring.<\/p>\n<h2>Quality assurance and control<\/h2>\n<p>Documented execution is essential for the serviceability of the foundation. Driving logs, penetration depths, blow counts, settlement behavior, and plumbness are recorded continuously. Dynamic and static load tests serve to verify load-bearing capacity. For pile head trimming, the target elevation, undamaged reinforcement, and a defined contact surface to the bearing are decisive. In addition, as-built surveys, hold points, and instrumented monitoring of vibration and noise support traceability and compliance.<\/p>\n<h2>Planning, logistics, and ground conditions<\/h2>\n<p>The choice of the driving concept depends on the ground profile, groundwater level, neighboring structures, equipment utilization, and access routes. In inner-city areas, low heights, narrow corridors, and load restrictions are typical. Compact carrier machines and complementary hand-positionable tools are suitable here. <strong>Hydraulic splitters<\/strong> and <strong>concrete pulverizers<\/strong> from Darda GmbH are well-suited in such situations for preparatory and accompanying works around pile heads and foundation parts, especially where vibration limits are strict. Early test installations and scenario-based method statements reduce risk and streamline approvals.<\/p>\n<h2>Special scenarios<\/h2>\n<p>Special boundary conditions require adapted methods and tools.<\/p>\n<h3>Hydraulic engineering and shoreline areas<\/h3>\n<p>Sheet pile walls and steel pipes are often installed with vibratory pile drivers. During deconstruction, clean, segmented removal is advantageous. <em>Steel shears<\/em> and <em>combination shears<\/em> make separation easier in step with lifting operations. Corrosion state, marine growth, and tidal windows influence both installation planning and dismantling sequences.<\/p>\n<h3>Inner-city excavation pits<\/h3>\n<p>Confined sites require low noise emissions and controlled interventions. For pile head trimming, <strong>concrete pulverizers<\/strong> and <strong>hydraulic splitters<\/strong> are ideal for exposing reinforcement in a targeted way and creating connection surfaces without affecting surrounding structures. Protective measures for adjacent buildings, continuous surveying, and vibration threshold management are established practice.<\/p>\n<h2>Practical tips for execution and deconstruction<\/h2>\n<ol>\n<li>Coordinate the driving concept early with the geotechnical laboratory; evaluate alternatives (impact, vibration, pressing) scenario-based.<\/li>\n<li>For pile heads: first mark the defined target elevation, then remove it in a controlled manner with <strong>concrete pulverizers<\/strong> and &#8211; if necessary &#8211; with <strong>hydraulic splitters<\/strong>.<\/li>\n<li>Expose, clean, and inspect reinforcement for damage; plan cut lines for steel sections with <em>steel shears<\/em>.<\/li>\n<li>Use vibration monitoring and ramp up parameters step by step to keep within limits.<\/li>\n<li>Ensure logistics flow: organize the removal of concrete debris and steel segments with precise <em>haulage logistics<\/em>.<\/li>\n<li>Define acceptance criteria in advance: target set per blow or vibration window, verticality tolerance, and head finish.<\/li>\n<li>Prepare contingency measures: alternative tools for hard driving layers, standby noise mitigation, and temporary reaction options for press-in systems.<\/li>\n<\/ol>\n<h2>Terminology and distinctions<\/h2>\n<p>\u201cPile driver\u201d designates the device for energy input. \u201cDriving works\u201d refers to the process of installing piles or sheet pile walls. In contrast stands drilling with soil excavation. While the driver is used to create the foundation, deconstruction includes trimming, exposing, and, where applicable, pulling or cutting the piles. Tools such as <strong>concrete pulverizers<\/strong>, <strong>hydraulic splitters<\/strong>, <em>combination shears<\/em>, and <em>multi cutters<\/em> work hand in hand here. Clear terminology supports specification, tendering, and consistent documentation across project phases.<\/p>\n<h2>Environmental aspects and circular economy<\/h2>\n<p>During installation and deconstruction of piles, reuse is an important factor. Steel sections can be returned to the material cycle after separation. Concrete is crushed, reinforcement is separated. Low-emission working methods &#8211; including dust suppression and efficient cutting techniques &#8211; contribute to sustainability. Tools from Darda GmbH that allow controlled splitting and targeted downsizing support these goals in the areas of <em>concrete demolition and special demolition<\/em>, <em>strip-out and cutting<\/em>, and in <em>special operations<\/em> where particular care for the surroundings and existing fabric is required. Selective dismantling, clean separation, and verified disposal routes improve life-cycle metrics and reduce environmental impact.<\/p>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>Pile drivers are key equipment in special foundation engineering when loads must be permanently transferred into bearing soil layers or when excavation pits need to be secured. They drive piles or sheet piles into the ground by impact, vibration, or pressing. In practice, the topic is not limited to new <a class=\"moretag\" href=\"https:\/\/www.darda.de\/en\/knowledge\/pile-driver\">read more&#8230;<\/a><\/p>\n","protected":false},"author":9,"featured_media":0,"parent":14846,"menu_order":0,"comment_status":"open","ping_status":"open","template":"tmpl\/template-wissen.php","meta":{"_acf_changed":false,"footnotes":"","_members_access_role":[],"_members_access_error":""},"class_list":["post-19523","page","type-page","status-publish","hentry"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.1 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Pile Driver - Construction Equipment &amp; Methods<\/title>\n<meta name=\"description\" content=\"Guide to pile driver equipment for foundation work \u2713 driving piles and sheet piles by impact, vibration &amp; press-in.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.darda.de\/en\/knowledge\/pile-driver\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Pile Driver - Construction Equipment &amp; Methods\" \/>\n<meta property=\"og:description\" content=\"Guide to pile driver equipment for foundation work \u2713 driving piles and sheet piles by impact, vibration &amp; press-in.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.darda.de\/en\/knowledge\/pile-driver\" \/>\n<meta property=\"og:site_name\" content=\"Darda GmbH\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/DardaDemolition\" \/>\n<meta property=\"article:modified_time\" content=\"2026-05-02T09:10:03+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"9 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/pile-driver\",\"url\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/pile-driver\",\"name\":\"Pile Driver - Construction Equipment & Methods\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#website\"},\"datePublished\":\"2025-11-19T10:22:58+00:00\",\"dateModified\":\"2026-05-02T09:10:03+00:00\",\"description\":\"Guide to pile driver equipment for foundation work \u2713 driving piles and sheet piles by impact, vibration & press-in.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/pile-driver#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/pile-driver\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/pile-driver#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.darda.de\\\/en\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Knowledge\",\"item\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Pile driver\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#website\",\"url\":\"https:\\\/\\\/www.darda.de\\\/en\",\"name\":\"Darda GmbH\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#organization\"},\"alternateName\":\"Abbruchwerkzeuge\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.darda.de\\\/en?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#organization\",\"name\":\"Darda GmbH\",\"url\":\"https:\\\/\\\/www.darda.de\\\/en\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.darda.de\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/android-icon-192x192-1.png\",\"contentUrl\":\"https:\\\/\\\/www.darda.de\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/android-icon-192x192-1.png\",\"width\":192,\"height\":192,\"caption\":\"Darda GmbH\"},\"image\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/DardaDemolition\",\"https:\\\/\\\/www.instagram.com\\\/darda_demolition\",\"https:\\\/\\\/www.youtube.com\\\/user\\\/DardaGmbH\",\"https:\\\/\\\/www.xing.com\\\/pages\\\/darda-gmbh\",\"https:\\\/\\\/de.linkedin.com\\\/company\\\/darda-gmbh\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Pile Driver - Construction Equipment & Methods","description":"Guide to pile driver equipment for foundation work \u2713 driving piles and sheet piles by impact, vibration & press-in.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.darda.de\/en\/knowledge\/pile-driver","og_locale":"en_US","og_type":"article","og_title":"Pile Driver - Construction Equipment & Methods","og_description":"Guide to pile driver equipment for foundation work \u2713 driving piles and sheet piles by impact, vibration & press-in.","og_url":"https:\/\/www.darda.de\/en\/knowledge\/pile-driver","og_site_name":"Darda GmbH","article_publisher":"https:\/\/www.facebook.com\/DardaDemolition","article_modified_time":"2026-05-02T09:10:03+00:00","twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"9 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.darda.de\/en\/knowledge\/pile-driver","url":"https:\/\/www.darda.de\/en\/knowledge\/pile-driver","name":"Pile Driver - Construction Equipment & Methods","isPartOf":{"@id":"https:\/\/www.darda.de\/en#website"},"datePublished":"2025-11-19T10:22:58+00:00","dateModified":"2026-05-02T09:10:03+00:00","description":"Guide to pile driver equipment for foundation work \u2713 driving piles and sheet piles by impact, vibration & press-in.","breadcrumb":{"@id":"https:\/\/www.darda.de\/en\/knowledge\/pile-driver#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.darda.de\/en\/knowledge\/pile-driver"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.darda.de\/en\/knowledge\/pile-driver#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.darda.de\/en"},{"@type":"ListItem","position":2,"name":"Knowledge","item":"https:\/\/www.darda.de\/en\/knowledge"},{"@type":"ListItem","position":3,"name":"Pile driver"}]},{"@type":"WebSite","@id":"https:\/\/www.darda.de\/en#website","url":"https:\/\/www.darda.de\/en","name":"Darda GmbH","description":"","publisher":{"@id":"https:\/\/www.darda.de\/en#organization"},"alternateName":"Abbruchwerkzeuge","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.darda.de\/en?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.darda.de\/en#organization","name":"Darda GmbH","url":"https:\/\/www.darda.de\/en","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.darda.de\/en#\/schema\/logo\/image\/","url":"https:\/\/www.darda.de\/wp-content\/uploads\/2017\/09\/android-icon-192x192-1.png","contentUrl":"https:\/\/www.darda.de\/wp-content\/uploads\/2017\/09\/android-icon-192x192-1.png","width":192,"height":192,"caption":"Darda GmbH"},"image":{"@id":"https:\/\/www.darda.de\/en#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/DardaDemolition","https:\/\/www.instagram.com\/darda_demolition","https:\/\/www.youtube.com\/user\/DardaGmbH","https:\/\/www.xing.com\/pages\/darda-gmbh","https:\/\/de.linkedin.com\/company\/darda-gmbh"]}]}},"_links":{"self":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/19523","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/users\/9"}],"replies":[{"embeddable":true,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/comments?post=19523"}],"version-history":[{"count":2,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/19523\/revisions"}],"predecessor-version":[{"id":26845,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/19523\/revisions\/26845"}],"up":[{"embeddable":true,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/14846"}],"wp:attachment":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/media?parent=19523"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}