{"id":19449,"date":"2025-11-12T09:07:39","date_gmt":"2025-11-12T08:07:39","guid":{"rendered":"https:\/\/www.darda.de\/?page_id=19449"},"modified":"2025-11-12T09:07:39","modified_gmt":"2025-11-12T08:07:39","slug":"quantity-calculation","status":"publish","type":"page","link":"https:\/\/www.darda.de\/en\/knowledge\/quantity-calculation","title":{"rendered":"Quantity calculation"},"content":{"rendered":"<div class=\"wissen-inhaltsbereich\">\n<p>Quantity calculation is a central foundation for planning, estimating, and executing works in concrete demolition, special demolition, rock excavation, and natural stone extraction. Those who reliably determine volumes, mass, quantities, and reinforcement ratios lay the groundwork for equipment deployment, takt planning, the selection of suitable methods, and logistical handling including disposal. Especially for mechanical methods such as splitting and fragmenting with <strong><a href=\"https:\/\/www.darda.de\/en\/product-overview\/hydraulic-rock-and-concrete-splitters\">hydraulic rock and concrete splitters<\/a><\/strong> or gripping and separating with <strong>concrete pulverizer<\/strong>, time requirements and occupational safety directly depend on realistic quantity allowances.<\/p>\n<h2>Definition: What is meant by quantity calculation<\/h2>\n<p>Quantity calculation is the systematic determination of quantitative parameters required for planning and executing construction, demolition, and extraction works. These include volume (m\u00b3), mass (t), lengths (m), areas (m\u00b2), unit counts (pcs.), and material shares (e.g., reinforcing steel in kg\/m\u00b3). In the fields of <em>concrete demolition and special demolition<\/em>, <em>gutting works and concrete cutting<\/em>, <em>rock excavation and tunnel construction<\/em>, <em>natural stone extraction<\/em>, and <em>special demolition<\/em>, quantity calculation merges geometric models, material properties, and work methods into robust numerical values.<\/p>\n<h2>Methods and calculation paths of quantity calculation<\/h2>\n<p>In practice, simple solid formulas, composite geometries, as-built measurement methods, and model-based approaches (e.g., from record drawings or 3D scans) are used. For reinforced concrete elements, volumes are typically derived from member thicknesses and areas, reinforcement ratios from experience or drawings. In rock removal, cubic capacities are determined from profiles, drilling or cutting patterns, including allowances for overbreak or underbreak. The choice of method depends on required accuracy, data availability, and the selected mechanical method\u2014such as splitting with hydraulic wedge splitter or fragmenting with concrete pulverizer.<\/p>\n<h2>Fundamentals: Units, densities, and typical key values<\/h2>\n<p>Reliable base constants are the prerequisite for dependable calculations. Typical densities at practical moisture are approximately: normal concrete 2.30\u20132.50 t\/m\u00b3, reinforced concrete 2.40\u20132.60 t\/m\u00b3, reinforcing steel 7.85 t\/m\u00b3, hard rock (granite\/gneiss) 2.60\u20132.80 t\/m\u00b3, limestone 2.40\u20132.70 t\/m\u00b3. For quantity calculation, openings, recesses, and cavities are deducted, and allowances for fracture edges, oversize, and screen loss are considered.<\/p>\n<h2>Quantity calculation in concrete demolition: elements, volume, and reinforcement<\/h2>\n<p>For reinforced concrete members, volume is frequently derived from standardized geometries. The resulting mass influences the selection of demolition sequences as well as the sizing of concrete pulverizer, hydraulic power pack, and lifting devices.<\/p>\n<h3>Typical elements and formulas<\/h3>\n<ul>\n<li>Wall: V = wall length \u00d7 wall height \u00d7 wall thickness<\/li>\n<li>Slab\/plate: V = footprint \u00d7 slab thickness<\/li>\n<li>Girder\/beam: V = width \u00d7 height \u00d7 length (possibly as T- or rectangular section)<\/li>\n<li>Foundation: V = base area \u00d7 depth (for stepped foundations, sum of partial bodies)<\/li>\n<li>Bored pile: V = \u03c0 \u00d7 (d\u00b2\/4) \u00d7 length<\/li>\n<\/ul>\n<h3>Reinforcement ratio and steel quantities<\/h3>\n<p>Without complete reinforcement drawings, the steel content is often estimated (e.g., in kg\/m\u00b3 of reinforced concrete, depending on use and element category). From the concrete volume, the steel quantities for separation and sorting processes as well as for deploying concrete pulverizer and steel shear can be derived. For the workflow, it is decisive whether the concrete is first broken up with a concrete pulverizer and the steel is then separated with shears, or whether a combined approach is appropriate.<\/p>\n<h2>Quantity calculation in rock excavation and tunnel construction<\/h2>\n<p>In rock, including contexts such as <a href=\"https:\/\/www.darda.de\/en\/applications\/rock-demolition-and-tunnel-construction\">rock demolition and tunnel construction<\/a>, cubic capacities are determined from design and actual profiles. In tunnel advance and bench work, overbreak and fragment size distribution must be considered. For mechanical splitting with hydraulic wedge splitter, the length of split lines, number of drill holes, hole diameter, and lot sizes must be quantified.<\/p>\n<h3>Split lines, drilling patterns, and lot sizes<\/h3>\n<ul>\n<li>Split length: Sum of the planned separation joints per advance or extraction face<\/li>\n<li>Number of drill holes: Split length divided by the spacing pattern (depending on rock strength)<\/li>\n<li>Lot size: Volume per work takt to coordinate with lifting devices and haulage logistics<\/li>\n<\/ul>\n<p>The resulting quantities govern the need for hydraulic power, the number of splitting cycles, and the sizing of the stone splitting cylinders.<\/p>\n<h2>Relation to concrete pulverizer and hydraulic wedge splitter<\/h2>\n<p><strong>Concrete pulverizer<\/strong> are designed for gripping, breaking, and reducing concrete members. Quantity calculation provides the required key data: element thicknesses, reinforcement ratios, break lengths, target particle sizes for onward loading. <strong>Hydraulic wedge splitter<\/strong> create defined separation joints in concrete or natural stone; decisive parameters are split lengths, number of drill holes, joint spacing, and the volume of the blocks to be separated. Both methods benefit from realistic volume and mass estimates, as these determine cycle times, gripping paths, intermediate storage, and means of transport.<\/p>\n<h2>Quantity calculation for gutting works and cutting<\/h2>\n<p>Before demolition, non-loadbearing layers, installations, and technical equipment are removed. Quantity allowances include areas for floor build-ups, linear meters of separation cuts, and counts of components. For precise openings, pre-cutting can reduce the load for concrete pulverizer. The total cutting meters serve to calculate equipment hours and consumables, as well as to coordinate with subsequent reduction works.<\/p>\n<h2>Reduction and separation processes: combination shears, multi cutters, steel shears, tank cutters<\/h2>\n<p>For metallic installations and structures, cutting lengths, material thicknesses, and cross-sections must be captured. From this, the need for cutting cycles and the suitability of tools is derived. In deconstruction projects using concrete pulverizer, the steel is often further separated with steel shear after breaking up. For tanks and vessels, circumference, wall thickness, and segmentation determine cutting quantities and the logistical sequence.<\/p>\n<h3>Key figures for estimating<\/h3>\n<ul>\n<li>Total cutting length in m and average material thickness<\/li>\n<li>Counts of profiles\/plates and their cross-sections<\/li>\n<li>Target particle sizes for the load (pre-sorting, recycling)<\/li>\n<\/ul>\n<h2>Hydraulic power packs: deriving power demand from quantities<\/h2>\n<p>Hydraulic power packs feed the cylinders, pulverizers, and shears. The quantity per unit time (e.g., m\u00b3\/h of concrete reduction or m of split line\/h) results from cycle time, stroke volume, operating pressure, and changeover times. From the planned daily quantity, the required operating time of the power pack is derived. <a href=\"https:\/\/www.darda.de\/en\/product-overview\/hydraulic-power-units\">Sizing of hydraulic power units<\/a> is carried out so that sufficient flow is available for parallel consumers without causing unnecessary downtime.<\/p>\n<h2>Process planning and logistics based on quantities<\/h2>\n<p>The determined total quantity is divided into manageable lots. This allows equipment combinations\u2014such as concrete pulverizer with hydraulic power pack and wheel loader\u2014to be synchronized precisely. For splitting works, advance widths are chosen so that lifting devices and transport routes are not overloaded. From volume and density, the transport masses are obtained and thus the number and takt of haulage trips.<\/p>\n<h3>Disposal and material flow management<\/h3>\n<p>Separate collection of concrete, reinforcing steel, natural stone, and mixed fractions requires exact quantities. Quantity calculation serves as the basis for ordering containers, planning intermediate storage, and providing documentation to stakeholders. If in doubt, safety allowances for breakage losses and oversize are set low but traceably.<\/p>\n<h2>Capturing base data: measurement and modeling<\/h2>\n<p>Depending on data availability, record drawings, on-site measurement, trial exposures, and spatial models are combined. For elements without complete drawings, sections and grid measurements help determine thicknesses, layers, and cavities. On rock faces, geological banding and joints are documented to realistically plan splitability and the drilling pattern.<\/p>\n<h3>Quality assurance<\/h3>\n<ul>\n<li>Plausibility checks by comparison with similar elements<\/li>\n<li>Spot measurements at critical locations<\/li>\n<li>Versioning of quantity states for estimating and billing<\/li>\n<\/ul>\n<h2>Safety and boundary conditions in quantity planning<\/h2>\n<p>Quantity allowances affect structural and operational safety. Lots that are too large can exceed gripping paths, stability, or lifting capacities. For splitting works, safety distances for uncontrolled fractures must be considered. References to standards and specifications must be checked on a project-specific basis; the values described here are of a general nature.<\/p>\n<h2>Typical mistakes and how to avoid them<\/h2>\n<ul>\n<li>Openings and recesses not deducted: leads to overestimation of concrete quantity<\/li>\n<li>Reinforcement ratio assumed incorrectly: influences the choice of concrete pulverizer and shears<\/li>\n<li>Overbreak in rock ignored: underestimates haulage and sorting needs<\/li>\n<li>Logistics quantities not coordinated: downtime due to missing containers or transport<\/li>\n<li>Cycle times generalized: hydraulic bottlenecks with multiple consumers<\/li>\n<\/ul>\n<h2>Example calculations from practice<\/h2>\n<p>1) Slab deconstruction with concrete pulverizer: slab 25.0 m \u00d7 12.0 m \u00d7 0.22 m. V = 25.0 \u00d7 12.0 \u00d7 0.22 = 66.0 m\u00b3. Mass (2.45 t\/m\u00b3) \u2248 161.7 t. Reinforcement ratio 90 kg\/m\u00b3 \u2192 steel \u2248 5.9 t. Planning: lot size 6 m\u00b3 per takt \u2192 11 takts. Transport: 12 t per trip \u2192 14 trips for concrete, 1\u20132 trips for steel.<\/p>\n<p>2) Wall opening with splitting device: wall 6.0 m \u00d7 0.35 m \u00d7 3.0 m, opening 2.0 m \u00d7 1.0 m \u00d7 0.35 m. V total = 6.0 \u00d7 3.0 \u00d7 0.35 = 6.30 m\u00b3. V opening = 2.0 \u00d7 1.0 \u00d7 0.35 = 0.70 m\u00b3. V net = 5.60 m\u00b3. Split line around the perimeter 6 m per opening, drilling pattern 25 cm \u2192 24 drill holes. Cycle planning: derive splitting and lifting times per lot from experience values.<\/p>\n<p>3) Rock removal in benches: area 18.0 m \u00d7 7.0 m, removal thickness 1.2 m. V = 151.2 m\u00b3. Density 2.70 t\/m\u00b3 \u2192 408 t. Overbreak allowance 8% \u2192 438.6 t. Split-line spacing 0.6 m \u2192 30 split lines at 7 m each = 210 m split length. Number of drill holes every 0.3 m \u2192 700 drill holes. Determine hydraulic demand and power pack runtime from m of split line\/h.<\/p>\n<h2>Checklist: step-by-step to reliable quantity calculation<\/h2>\n<ol>\n<li>As-built capture: drawings, measurement, probes, material properties<\/li>\n<li>Model geometry: divide elements and rock volumes into partial bodies<\/li>\n<li>Calculate volumes: consider openings, cavities, and over\/underbreak<\/li>\n<li>Determine material shares: reinforcing steel, inserts, installations<\/li>\n<li>Define lot sizes: suitable for concrete pulverizer, splitting cylinders, and logistics<\/li>\n<li>Match equipment performance and hydraulics: cycle times and parallel operation<\/li>\n<li>Derive disposal and transport quantities: containers, trips, intermediate storage<\/li>\n<li>Plausibilize and document: assumptions, sources, calculation steps<\/li>\n<\/ol>\n<h2>Documentation and post-calculation<\/h2>\n<p>Clear, traceable documentation of quantities, assumptions, and calculation paths facilitates site control and subsequent post-calculation. Deviations between allowance and actual quantities provide valuable key figures for future projects\u2014such as realistic m\u00b3\/h with concrete pulverizer for the respective element type or split meters\/h in defined rock. This way, quantity calculations become more precise step by step, and workflows in concrete demolition, rock removal, gutting works, and natural stone extraction can be planned more efficiently.<\/p>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>Quantity calculation is a central foundation for planning, estimating, and executing works in concrete demolition, special demolition, rock excavation, and natural stone extraction. Those who reliably determine volumes, mass, quantities, and reinforcement ratios lay the groundwork for equipment deployment, takt planning, the selection of suitable methods, and logistical handling including <a class=\"moretag\" href=\"https:\/\/www.darda.de\/en\/knowledge\/quantity-calculation\">read more&#8230;<\/a><\/p>\n","protected":false},"author":9,"featured_media":0,"parent":14846,"menu_order":0,"comment_status":"open","ping_status":"open","template":"tmpl\/template-wissen.php","meta":{"_acf_changed":false,"footnotes":""},"class_list":["post-19449","page","type-page","status-publish","hentry"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.4 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Quantity Calculation in Concrete &amp; Rock Excavation<\/title>\n<meta name=\"description\" content=\"Practical guide to quantity calculation in concrete demolition and rock excavation \u2713 covering methods, units &amp; planning.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.darda.de\/en\/knowledge\/quantity-calculation\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Quantity Calculation in Concrete &amp; Rock Excavation\" \/>\n<meta property=\"og:description\" content=\"Practical guide to quantity calculation in concrete demolition and rock excavation \u2713 covering methods, units &amp; planning.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.darda.de\/en\/knowledge\/quantity-calculation\" \/>\n<meta property=\"og:site_name\" content=\"Darda GmbH\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/DardaDemolition\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"8 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/quantity-calculation\",\"url\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/quantity-calculation\",\"name\":\"Quantity Calculation in Concrete & Rock Excavation\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#website\"},\"datePublished\":\"2025-11-12T08:07:39+00:00\",\"description\":\"Practical guide to quantity calculation in concrete demolition and rock excavation \u2713 covering methods, units & planning.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/quantity-calculation#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/quantity-calculation\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/quantity-calculation#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.darda.de\\\/en\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Knowledge\",\"item\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Quantity calculation\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#website\",\"url\":\"https:\\\/\\\/www.darda.de\\\/en\",\"name\":\"Darda GmbH\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#organization\"},\"alternateName\":\"Abbruchwerkzeuge\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.darda.de\\\/en?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#organization\",\"name\":\"Darda GmbH\",\"url\":\"https:\\\/\\\/www.darda.de\\\/en\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.darda.de\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/android-icon-192x192-1.png\",\"contentUrl\":\"https:\\\/\\\/www.darda.de\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/android-icon-192x192-1.png\",\"width\":192,\"height\":192,\"caption\":\"Darda GmbH\"},\"image\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/DardaDemolition\",\"https:\\\/\\\/www.instagram.com\\\/darda_demolition\",\"https:\\\/\\\/www.youtube.com\\\/user\\\/DardaGmbH\",\"https:\\\/\\\/www.xing.com\\\/pages\\\/darda-gmbh\",\"https:\\\/\\\/de.linkedin.com\\\/company\\\/darda-gmbh\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Quantity Calculation in Concrete & Rock Excavation","description":"Practical guide to quantity calculation in concrete demolition and rock excavation \u2713 covering methods, units & planning.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.darda.de\/en\/knowledge\/quantity-calculation","og_locale":"en_US","og_type":"article","og_title":"Quantity Calculation in Concrete & Rock Excavation","og_description":"Practical guide to quantity calculation in concrete demolition and rock excavation \u2713 covering methods, units & planning.","og_url":"https:\/\/www.darda.de\/en\/knowledge\/quantity-calculation","og_site_name":"Darda GmbH","article_publisher":"https:\/\/www.facebook.com\/DardaDemolition","twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"8 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.darda.de\/en\/knowledge\/quantity-calculation","url":"https:\/\/www.darda.de\/en\/knowledge\/quantity-calculation","name":"Quantity Calculation in Concrete & Rock Excavation","isPartOf":{"@id":"https:\/\/www.darda.de\/en#website"},"datePublished":"2025-11-12T08:07:39+00:00","description":"Practical guide to quantity calculation in concrete demolition and rock excavation \u2713 covering methods, units & planning.","breadcrumb":{"@id":"https:\/\/www.darda.de\/en\/knowledge\/quantity-calculation#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.darda.de\/en\/knowledge\/quantity-calculation"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.darda.de\/en\/knowledge\/quantity-calculation#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.darda.de\/en"},{"@type":"ListItem","position":2,"name":"Knowledge","item":"https:\/\/www.darda.de\/en\/knowledge"},{"@type":"ListItem","position":3,"name":"Quantity calculation"}]},{"@type":"WebSite","@id":"https:\/\/www.darda.de\/en#website","url":"https:\/\/www.darda.de\/en","name":"Darda GmbH","description":"","publisher":{"@id":"https:\/\/www.darda.de\/en#organization"},"alternateName":"Abbruchwerkzeuge","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.darda.de\/en?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.darda.de\/en#organization","name":"Darda GmbH","url":"https:\/\/www.darda.de\/en","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.darda.de\/en#\/schema\/logo\/image\/","url":"https:\/\/www.darda.de\/wp-content\/uploads\/2017\/09\/android-icon-192x192-1.png","contentUrl":"https:\/\/www.darda.de\/wp-content\/uploads\/2017\/09\/android-icon-192x192-1.png","width":192,"height":192,"caption":"Darda GmbH"},"image":{"@id":"https:\/\/www.darda.de\/en#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/DardaDemolition","https:\/\/www.instagram.com\/darda_demolition","https:\/\/www.youtube.com\/user\/DardaGmbH","https:\/\/www.xing.com\/pages\/darda-gmbh","https:\/\/de.linkedin.com\/company\/darda-gmbh"]}]}},"_links":{"self":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/19449","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/users\/9"}],"replies":[{"embeddable":true,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/comments?post=19449"}],"version-history":[{"count":1,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/19449\/revisions"}],"predecessor-version":[{"id":20340,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/19449\/revisions\/20340"}],"up":[{"embeddable":true,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/14846"}],"wp:attachment":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/media?parent=19449"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}