{"id":19121,"date":"2025-10-06T08:27:21","date_gmt":"2025-10-06T06:27:21","guid":{"rendered":"https:\/\/www.darda.de\/fall-direction"},"modified":"2026-04-06T07:57:02","modified_gmt":"2026-04-06T05:57:02","slug":"fall-direction","status":"publish","type":"page","link":"https:\/\/www.darda.de\/en\/knowledge\/fall-direction","title":{"rendered":"Fall direction"},"content":{"rendered":"<div class=\"wissen-inhaltsbereich\">\n<p>The fall direction describes the deliberately planned axis of movement or tipping along which a component, a section of a structure, or a rock mass is guided to the ground in a controlled manner after separation. In concrete demolition, special demolition, rock excavation, and tunnel construction, correctly defining the fall direction determines safety, efficiency, and damage avoidance. It influences the choice of separation method, the sequence of work steps, and the selection of tools &#8211; from hydraulic splitting with <em>hydraulic wedge splitter<\/em> to selective size reduction with <em>concrete demolition shear<\/em>. In professional planning, the fall direction is embedded in method statements, risk assessments, and permitting, ensuring predictable execution and compliance with site constraints.<\/p>\n<h2>Definition: What is meant by the fall direction?<\/h2>\n<p><strong>Fall direction<\/strong> refers to the intended direction of the movement vector of a released component or rock block once stabilizing connections (e.g., reinforcement, mortar bond, natural or artificial bonding surfaces) have been controlledly removed or weakened. Technically, the fall direction is defined by geometry, gravity, supports and bearing points, tipping axes, predetermined breaking points, residual cross-sections, as well as by aids such as bracing, shoring, and defined separation cuts. The aim is to make the lowering path predictable, avoid collateral damage, minimize risks, and optimize logistics &#8211; for example, material flow to crushers or haulage logistics. In documentation, the fall direction is often specified as an azimuth or vector relative to the site grid and verified by sketches or 3D sequences.<\/p>\n<h2>Origin, terminology, and classification in practice<\/h2>\n<p>Professional engagement with fall direction has evolved from classic demolition practice: from large-volume tipping operations to precise, low-vibration methods. In today\u2019s practice, fall direction is not only understood as the tipping direction of massive elements, but also as the preferred release direction for slabs, cantilevers, masonry panels, or natural stone blocks. In modern hydraulic methods, the fall direction can often be controlled already via <em>crack initiation<\/em> and <em>crack propagation<\/em> &#8211; for example, through drilling patterns, wedge orientation, and wedge sequence with hydraulic wedge splitter, or by the sequence of bite points and the targeted guidance of residual cross-sections with concrete demolition shear. This expanded view emphasizes controlled lowering, staged separation, and the prevention of unintended load paths.<\/p>\n<h2>Importance of the fall direction in concrete demolition and special demolition<\/h2>\n<p>In tight environments near existing structures, infrastructure, and sensitive areas, a controlled fall direction is essential. Wall panels, slab fields, column heads, and cantilevers are prepared to yield along a previously defined axis of rotation. <em>Concrete demolition shear<\/em> locally reduce cross-sections, expose reinforcement, and define residual areas that control the moment distribution. <em>Hydraulic wedge splitter<\/em> create low-pressure separation joints and provide components with a clear predetermined breaking line. In combination with shoring and load relief, elements can be lowered in directions that favor team safety, protection of the surroundings, and an orderly material flow.<\/p>\n<ul>\n<li><strong>Core objectives:<\/strong> predictable kinematics along the intended rotation axis, minimal secondary damage, and optimized downstream logistics.<\/li>\n<li><strong>Secondary effects:<\/strong> reduced vibration and noise, better recyclability through defined fragment sizes, and improved access for follow-on trades.<\/li>\n<\/ul>\n<h3>Structural logic and tipping axes<\/h3>\n<p>The fall direction results from the position of the center of gravity relative to the planned tipping edge. By separation cuts, notches, and controlled weakening of specific zones, the center of gravity is deliberately shifted until the component tips about the chosen axis. A correct assessment of support conditions, fixity, and reinforcement layout is crucial. Simple preparatory sketches or digital models that illustrate the lever arms and residual sections enhance reliability.<\/p>\n<h3>Tension and compression zones in concrete components<\/h3>\n<p>Targeted reduction of the tension zone &#8211; for example, through selective size reduction with concrete demolition shear &#8211; supports the desired fall direction. Compression zones are maintained until the tipping motion safely initiates. This sequence requires a clear work order and ongoing control of the residual load-bearing capacity. Where present, prestressing and rebar anchorage lengths must be considered to avoid unintended restraint.<\/p>\n<h2>Planning and preparation: Influencing factors and boundary conditions<\/h2>\n<p>A robust definition of the fall direction is based on the systematic recording of all boundary conditions. These include geometry, material condition, bond conditions, attachments, installations, accessibility, protected assets, and logistical requirements. The outcome is consolidated in a concise method statement including a risk register, monitoring concept, and contingency actions for deviations.<\/p>\n<h3>Geometry, material, and reinforcement<\/h3>\n<p>Dimensions, slenderness, concrete strengths, reinforcement ratio, and the location of <em>rebar lap splice<\/em> influence where cracks form and how they propagate. These parameters also determine the drilling pattern for splitting wedges and the sequence of bite points for concrete demolition shear. Additional drivers include cover depth, aggregate size, existing damage, and any post-tensioning or embedded steelwork.<\/p>\n<h3>Subsoil, supports, and voids<\/h3>\n<p>Support edges, intermediate slabs, voids, and underfills can unexpectedly influence tipping movements. Preliminary work for inspection, exposure, and probing reduces uncertainties. Where necessary, non-destructive testing or trial openings clarify hidden interfaces and potential jamming points.<\/p>\n<h3>Environmental conditions<\/h3>\n<p>Weather, wind, vibration sensitivity of neighboring buildings, emissions, and space constraints must be considered in planning the fall direction. Required safety distance and cordoned-off areas are derived from this. Noise windows, dust suppression, and traffic management plans are coordinated accordingly.<\/p>\n<h2>Methods for controlling the fall direction<\/h2>\n<p>Control of the fall direction is achieved through a targeted combination of separating, weakening, relieving, and securing. The choice of method depends on the material, the environment, and target criteria such as low vibration levels or dust reduction. Frequently, hybrid concepts are used to balance precision, speed, and environmental impact.<\/p>\n<h3>Separation cuts, gutting, and pre-relief<\/h3>\n<p>Gutting works and the removal of non-load-bearing layers reduce self-weight and expose edges for tipping axes. Sawing techniques create defined cuts that help shape the lowering path. Depth control, kerf width, and sequence are aligned with the planned residual cross-sections and the intended rotation axis.<\/p>\n<h3>Hydraulic splitting with hydraulic wedge splitter<\/h3>\n<p>Drill holes form the grid for wedges and cylinders. With increasing splitting force, cracks open preferentially along intended lines. In this way, the fall direction of heavy components and rock bodies can be guided along the crack front &#8211; with low vibrations and high reproducibility, typically using <a href=\"https:\/\/www.darda.de\/en\/product-overview\/hydraulic-rock-and-concrete-splitters\">hydraulic rock and concrete splitters<\/a>. This approach is suitable where blasting is restricted and where adjacent structures require controlled energy input.<\/p>\n<h3>Selective size reduction with concrete demolition shear<\/h3>\n<p>Concrete demolition shear enable controlled reduction of cross-sections, exposure of reinforcement, and creation of defined residual cross-sections. Through the sequence of grip and break points, the tipping motion can be deliberately triggered while tension members are severed or held under control. Jaw geometry, throat depth, and closing force are selected to match section thickness and rebar density.<\/p>\n<h3>Shoring, bracing, guiding<\/h3>\n<p>Temporary supports, bracing, and guiding elements stabilize until the intended time of lowering. They limit the range of motion and help maintain the fall direction. Mechanical stops, adjustable shores, and simple guide rails can be combined to confine trajectories.<\/p>\n<h2>The fall direction in rock excavation and tunnel construction<\/h2>\n<p>In rock excavation and tunnel construction, fall direction is often controlled via crack propagation and block release. <em>Hydraulic wedge splitter<\/em> and <em>hydraulic wedge splitter<\/em> work with precisely positioned drilling patterns so that separation planes open along bedding, jointing, or defined lines. Blocks can thus tip forward, slide sideways, or be lowered downward in a controlled manner without affecting adjacent structures. Back-analysis of wedge failures and joint persistence supports selection of spacing and sequence.<\/p>\n<h3>Drilling pattern and wedge orientation<\/h3>\n<p>Spacing, depth, and orientation of the drill holes determine the crack front. By offsetting wedge orientation, the preferred crack direction and thus the fall direction can be influenced. Staggered, fan-shaped, or parallel grids are used depending on anisotropy and required block geometry.<\/p>\n<h3>Applications close to the tunnel face<\/h3>\n<p>At tunnel portals and niches, blocks are released so that movement occurs into the secured area. This preserves lining and fit-out. Advance supports and face stabilization are coordinated with the release sequence to maintain excavation stability.<\/p>\n<h2>Natural stone extraction: Gentle winning through controlled fall direction<\/h2>\n<p>In quarries, a clearly defined fall direction allows blocks to be safely released with minimal crack damage. By splitting along the natural fabric and along predetermined separation joints, blocks can be purposefully tipped and set down. This facilitates further processing and protects storage surfaces. Careful pad placement and cushioning reduce impact and preserve block integrity.<\/p>\n<h2>Gutting and cutting: The fall direction indoors<\/h2>\n<p>In buildings under ongoing use, low vibration, quiet operation, and precise control are required. <em>Concrete demolition shear<\/em> and compact splitting tools support the controlled lowering of wall and slab fields into prepared areas. The fall direction is chosen so that shafts, lines, and fa\u00e7ades remain protected. Transfer points, chutes, and intermediate set-downs are planned to avoid secondary impacts.<\/p>\n<h2>Special operations: work in sensitive environments<\/h2>\n<p>Near sensitive facilities, traffic areas, or listed structures, the fall direction must be planned with particular care. Hydraulic methods with <em>hydraulic wedge splitter<\/em> as well as the targeted use of <em>concrete demolition shear<\/em> help guide components into defined areas and prevent uncontrolled movements. Where needed, vibration and displacement monitoring, protective scaffolds, and temporary coverings are integrated.<\/p>\n<h2>Safety and occupational safety in controlling the fall direction<\/h2>\n<p>The definition of the fall direction must be accompanied by organizational and technical protective measures. These include cordoned-off hazard areas, clear signals, clear responsibilities, continuous observation of component behavior, and appropriate personal protective equipment. Requirements from standards and regulatory authorities must be observed; statements here are general and do not replace a case-by-case assessment.<\/p>\n<ul>\n<li>Define and maintain exclusion zones with physical barriers and signage.<\/li>\n<li>Establish communication protocols and stop signals for all team members.<\/li>\n<li>Use tag-out procedures for suspended elements and secure residual sections.<\/li>\n<li>Prepare contingency measures for deviations from the planned movement.<\/li>\n<\/ul>\n<h2>Documentation, monitoring, and quality assurance<\/h2>\n<p>Before starting, the initial condition, separation lines, tipping axes, and safety measures are documented. During the work, measuring points, visual inspections, and &#8211; if necessary &#8211; simple inclination or crack width checks support compliance with the planned fall direction. After completion, photos, dimensional records, and short reports ensure traceability. Where complexity is higher, inclinometers, displacement targets, or load readings on shores substantiate compliance.<\/p>\n<h2>Practical procedure step by step<\/h2>\n<ol>\n<li>Clarify objectives and boundary conditions (protected assets, logistics, emissions).<\/li>\n<li>Perform structural or rock analysis (geometry, bond, reinforcement\/structure).<\/li>\n<li>Determine the fall direction, define the tipping axis and residual cross-sections.<\/li>\n<li>Select the separation concept (sawing, <em>hydraulic wedge splitter<\/em>, <em>concrete demolition shear<\/em>, combinations).<\/li>\n<li>Define drilling pattern or cut lines; plan shoring and safety.<\/li>\n<li>Gut and pre-relieve; secure the work area.<\/li>\n<li>Split and\/or weaken using shears; deliberately leave residual cross-sections.<\/li>\n<li>Initiate and monitor movement; guide and limit the fall direction.<\/li>\n<li>Secure, set down, separate the element; transport material in an orderly manner.<\/li>\n<li>Inspection, documentation, and release of the next section.<\/li>\n<li>Update the risk assessment and method statement based on findings from execution.<\/li>\n<\/ol>\n<h2>Typical mistakes and how to avoid them<\/h2>\n<ul>\n<li>Unclear tipping axis: preliminary work for shifting the center of gravity is insufficient. Solution: deliberately plan and verify residual cross-sections.<\/li>\n<li>Overlooked bond zones: hidden reinforcement or infill holds components. Solution: probe, expose, trial bites with concrete demolition shear.<\/li>\n<li>Underestimated friction and supports: the component jams or tips uncontrollably. Solution: consider sliding surfaces, adjust shoring.<\/li>\n<li>Insufficient exclusion zones: people or equipment in the range of motion. Solution: plan, monitor, and strictly maintain the exclusion radius.<\/li>\n<li>Incorrect wedge orientation\/drill spacing: crack front runs off course. Solution: adapt drilling pattern to material and geometry.<\/li>\n<li>Poor coordination: missing briefings or unclear hand signals. Solution: establish and rehearse communication and stop rules.<\/li>\n<li>Ignoring dynamic effects: rebound or impact not considered. Solution: include damping and arresting measures, verify set-down surfaces.<\/li>\n<\/ul>\n<h2>Calculation and estimation fundamentals<\/h2>\n<p>Static basics are decisive for the fall direction: location of the center of gravity, lever arms to potential tipping edges, reaction forces at supports, coefficients of friction, and tensile and compressive capacities in the residual cross-sections. In practice, robust estimates with safety reserves are used. Where necessary, simplified models are applied. Such considerations must fit the specific case; they are not generally binding.<\/p>\n<ul>\n<li>Check the moment balance about the planned rotation edge with conservative friction values.<\/li>\n<li>Verify residual section capacities against anticipated tensile and shear demands during initiation.<\/li>\n<li>Confirm that arresting and set-down capacities exceed dynamic effects with reserve.<\/li>\n<\/ul>\n<h2>Tools and equipment at a glance<\/h2>\n<p>Various tool groups are available for precise control of the fall direction. Their selection depends on material, component geometry, and environmental requirements. Darda GmbH addresses these tasks with hydraulic solutions that operate with low vibration and allow fine dosing of interventions. Proper matching of power packs, hoses, and tool attachments is essential for reproducible results.<\/p>\n<ul>\n<li><strong>Hydraulic wedge splitter<\/strong>: Create defined cracks along a drilling pattern and steer the release direction of heavy components and rock bodies.<\/li>\n<li><strong>Hydraulic power pack<\/strong>: Supply tools with the required energy; fine control supports graded force application.<\/li>\n<li><strong>Concrete demolition shear<\/strong>: Selective size reduction, exposure of reinforcement, setting predetermined breaking points, and guiding the tipping movement.<\/li>\n<li><strong>Combination shears<\/strong> and <strong>multi cutters<\/strong>: Versatile separation tasks on mixed materials, for preparation and residual cross-section control.<\/li>\n<li><strong>Steel shear<\/strong>: Cutting reinforcement and steel sections to eliminate unintended holding effects.<\/li>\n<li><strong>Cutting torch<\/strong>: Specific separation tasks on hollow bodies and sheet metal, with defined release directions of segments.<\/li>\n<\/ul>\n<h2>Qualitative criteria for good fall-direction planning<\/h2>\n<p>Compelling planning of the fall direction is transparently documented, reduces unbalance and residual forces, integrates safety and exclusion concepts, and is structured into sensible partial steps. It leverages material properties and tool kinematics to create separation lines and tipping axes that can be reliably implemented in execution. Measurable acceptance criteria (e.g., maximum deviation from intended set-down area) and clear go\/no-go thresholds complete the quality framework.<\/p>\n<h2>Cross-application notes<\/h2>\n<p>Whether <em>concrete demolition and special demolition<\/em>, <em>gutting works and cutting<\/em>, <em>rock excavation and tunnel construction<\/em>, <em>natural stone extraction<\/em>, or <em>special operations<\/em>: fall direction is always a central planning feature. A clean cutting and splitting strategy, the correct sequence of work steps, and consistent securing of the range of motion are the keys to moving components and blocks to where they can be safely processed and transported away. Sequencing, monitoring, and feedback into planning loops ensure consistent outcomes across applications.<\/p>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>The fall direction describes the deliberately planned axis of movement or tipping along which a component, a section of a structure, or a rock mass is guided to the ground in a controlled manner after separation. In concrete demolition, special demolition, rock excavation, and tunnel construction, correctly defining the fall <a class=\"moretag\" href=\"https:\/\/www.darda.de\/en\/knowledge\/fall-direction\">read more&#8230;<\/a><\/p>\n","protected":false},"author":9,"featured_media":0,"parent":14846,"menu_order":0,"comment_status":"open","ping_status":"open","template":"tmpl\/template-wissen.php","meta":{"_acf_changed":false,"footnotes":""},"class_list":["post-19121","page","type-page","status-publish","hentry"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.4 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Fall Direction in Demolition &amp; Tunnel Construction<\/title>\n<meta name=\"description\" content=\"Plan demolition and tunneling with fall direction guidance \u2713 for controlled tipping, reduced vibration &amp; lower risks.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.darda.de\/en\/knowledge\/fall-direction\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Fall Direction in Demolition &amp; Tunnel Construction\" \/>\n<meta property=\"og:description\" content=\"Plan demolition and tunneling with fall direction guidance \u2713 for controlled tipping, reduced vibration &amp; lower risks.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.darda.de\/en\/knowledge\/fall-direction\" \/>\n<meta property=\"og:site_name\" content=\"Darda GmbH\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/DardaDemolition\" \/>\n<meta property=\"article:modified_time\" content=\"2026-04-06T05:57:02+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"12 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/fall-direction\",\"url\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/fall-direction\",\"name\":\"Fall Direction in Demolition & Tunnel Construction\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#website\"},\"datePublished\":\"2025-10-06T06:27:21+00:00\",\"dateModified\":\"2026-04-06T05:57:02+00:00\",\"description\":\"Plan demolition and tunneling with fall direction guidance \u2713 for controlled tipping, reduced vibration & lower risks.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/fall-direction#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/fall-direction\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\\\/fall-direction#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.darda.de\\\/en\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Knowledge\",\"item\":\"https:\\\/\\\/www.darda.de\\\/en\\\/knowledge\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Fall direction\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#website\",\"url\":\"https:\\\/\\\/www.darda.de\\\/en\",\"name\":\"Darda GmbH\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#organization\"},\"alternateName\":\"Abbruchwerkzeuge\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.darda.de\\\/en?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#organization\",\"name\":\"Darda GmbH\",\"url\":\"https:\\\/\\\/www.darda.de\\\/en\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.darda.de\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/android-icon-192x192-1.png\",\"contentUrl\":\"https:\\\/\\\/www.darda.de\\\/wp-content\\\/uploads\\\/2017\\\/09\\\/android-icon-192x192-1.png\",\"width\":192,\"height\":192,\"caption\":\"Darda GmbH\"},\"image\":{\"@id\":\"https:\\\/\\\/www.darda.de\\\/en#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/DardaDemolition\",\"https:\\\/\\\/www.instagram.com\\\/darda_demolition\",\"https:\\\/\\\/www.youtube.com\\\/user\\\/DardaGmbH\",\"https:\\\/\\\/www.xing.com\\\/pages\\\/darda-gmbh\",\"https:\\\/\\\/de.linkedin.com\\\/company\\\/darda-gmbh\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Fall Direction in Demolition & Tunnel Construction","description":"Plan demolition and tunneling with fall direction guidance \u2713 for controlled tipping, reduced vibration & lower risks.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.darda.de\/en\/knowledge\/fall-direction","og_locale":"en_US","og_type":"article","og_title":"Fall Direction in Demolition & Tunnel Construction","og_description":"Plan demolition and tunneling with fall direction guidance \u2713 for controlled tipping, reduced vibration & lower risks.","og_url":"https:\/\/www.darda.de\/en\/knowledge\/fall-direction","og_site_name":"Darda GmbH","article_publisher":"https:\/\/www.facebook.com\/DardaDemolition","article_modified_time":"2026-04-06T05:57:02+00:00","twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"12 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.darda.de\/en\/knowledge\/fall-direction","url":"https:\/\/www.darda.de\/en\/knowledge\/fall-direction","name":"Fall Direction in Demolition & Tunnel Construction","isPartOf":{"@id":"https:\/\/www.darda.de\/en#website"},"datePublished":"2025-10-06T06:27:21+00:00","dateModified":"2026-04-06T05:57:02+00:00","description":"Plan demolition and tunneling with fall direction guidance \u2713 for controlled tipping, reduced vibration & lower risks.","breadcrumb":{"@id":"https:\/\/www.darda.de\/en\/knowledge\/fall-direction#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.darda.de\/en\/knowledge\/fall-direction"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.darda.de\/en\/knowledge\/fall-direction#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.darda.de\/en"},{"@type":"ListItem","position":2,"name":"Knowledge","item":"https:\/\/www.darda.de\/en\/knowledge"},{"@type":"ListItem","position":3,"name":"Fall direction"}]},{"@type":"WebSite","@id":"https:\/\/www.darda.de\/en#website","url":"https:\/\/www.darda.de\/en","name":"Darda GmbH","description":"","publisher":{"@id":"https:\/\/www.darda.de\/en#organization"},"alternateName":"Abbruchwerkzeuge","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.darda.de\/en?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.darda.de\/en#organization","name":"Darda GmbH","url":"https:\/\/www.darda.de\/en","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.darda.de\/en#\/schema\/logo\/image\/","url":"https:\/\/www.darda.de\/wp-content\/uploads\/2017\/09\/android-icon-192x192-1.png","contentUrl":"https:\/\/www.darda.de\/wp-content\/uploads\/2017\/09\/android-icon-192x192-1.png","width":192,"height":192,"caption":"Darda GmbH"},"image":{"@id":"https:\/\/www.darda.de\/en#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/DardaDemolition","https:\/\/www.instagram.com\/darda_demolition","https:\/\/www.youtube.com\/user\/DardaGmbH","https:\/\/www.xing.com\/pages\/darda-gmbh","https:\/\/de.linkedin.com\/company\/darda-gmbh"]}]}},"_links":{"self":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/19121","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/users\/9"}],"replies":[{"embeddable":true,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/comments?post=19121"}],"version-history":[{"count":1,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/19121\/revisions"}],"predecessor-version":[{"id":25991,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/19121\/revisions\/25991"}],"up":[{"embeddable":true,"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/pages\/14846"}],"wp:attachment":[{"href":"https:\/\/www.darda.de\/en\/wp-json\/wp\/v2\/media?parent=19121"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}